Page 1 of 1

ideaMaker 3.5.0-Beta Release Notes

Posted: Thu Oct 24, 2019 5:46 pm
by Vicky@Raise3D
Dear all,

We have released the new version of ideaMaker 3.5.0 Beta today.

Release Notes:
New requested features and debugging based on user feedback.

Read More
https://www.raise3d.com/news/ideamaker-3-5-0-beta-release-notes/
Download ideaMaker 3.5.0 Beta: https://www.raise3d.com/pages/download

Note: Since we have added a lot new features in this version, it may include some unknown bugs. If you have an important task to slice with, we still recommend you to use the current official version 3.4.2. Quick link: ideaMaker 3.4.2 https://www.raise3d.com/pages/download

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Fri Oct 25, 2019 4:42 pm
by DeX
Wow, nice! So much to test ^_^

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Sun Oct 27, 2019 8:28 pm
by Stevie
Small typo in your text ;-) not 3.4.0 Beta but 3.5.0 Beta I guess ;-)

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Mon Oct 28, 2019 5:33 pm
by Vicky@Raise3D
Stevie wrote:Small typo in your text ;-) not 3.4.0 Beta but 3.5.0 Beta I guess ;-)


Thanks for point out. Issue fixed.

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Thu Nov 14, 2019 8:03 am
by Nibber
This is looking gooood!

With Dense support (both manual and automatic) I get some of the main support coming into contact with the model. Its much much worse doing it in the slicing profile.

Capture.PNG


Settings are:
3mm pillars
0 mm Horizontal offset
5mm Dense support
100% dense support infill

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Thu Nov 14, 2019 11:03 pm
by Vicky@Raise3D
Please try if you modify the Horizontal Offset from 0 to some other values whether the result will change or not.

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Tue Jan 28, 2020 1:06 pm
by DeX
Is an update already being prepared?

I returned to IM from S3D and really like it's print quality and like great new features.
But unfortunately it has many little annoying things and crashing things here and there =(

It is does not save my print profiles...
it is crashed...
It is appears inappropriate dialog windows...
upload-export.JPG

annoyinf.JPG


Is an update already being prepared?

Is it possible to change this settings with a mouse scroll ? (no need to click and clcik and cklikc)
scroll.png

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Wed Jan 29, 2020 2:12 am
by Vicky@Raise3D
We would prefer using mouse clicking instead of scroll wheel to select the values to avoid mishandling.
About the other issues you mentioned, would you like to give us more information?

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Wed Jan 29, 2020 6:30 am
by DeX
Vicky@Raise3D wrote:We would prefer using mouse clicking instead of scroll wheel to select the values to avoid mishandling.
About the other issues you mentioned, would you like to give us more information?


to deprive me of the opportunity to scroll the idea too so-so. (thanks to GoogleTranslate) =)

I just started to use IM (again, give it another chance lol) and will discover issues...
main thing is deliver it to you. find a time to came here and wrote some issue down.. on overseas language.. uhh
well

I just received my first results with IRONING feature ! IT IS WORKED GREAT! LOVE IT !
Small features works not great but very useful.
I'm in love with the hiding seams feature !

upd1.
I could save the slicing template only from the Simple Mode =/ you know that?
all more curious and curious! ha-ha

upd2.
It’s time to do something with these movements before Infill starts. All these spreading plastic... argh
infills.jpg

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Thu Jan 30, 2020 7:23 pm
by Vicky@Raise3D
When switch over to advanced mode, click ok/save it will save the changes.

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Fri Jan 31, 2020 8:40 am
by DeX
Vicky@Raise3D wrote:When switch over to advanced mode, click ok/save it will save the changes.

excuse me, it is saves but without save as option and with "(not saved)" in the template name.
coz it's beta?!

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Mon Feb 03, 2020 6:02 pm
by Vicky@Raise3D
Save as button will only show under Simple Mode. Not Saved will only shown when Slice with unsaved templates option enabled under Preferences.

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Sat Feb 08, 2020 12:43 am
by DeX
как то сложновато. плюс ещё настройки по слоям или группам.. а если с модификаторами!? ЭТО всё сохраняется?

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Tue Feb 11, 2020 1:42 am
by Vicky@Raise3D
Per-layer, Per-group settings and Modifier settings are separate from main template according to different models. They will be saved together with .idea file. So if you enabled Save idea file these settings will be save in .idea file automatically.

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Fri Feb 14, 2020 5:57 am
by DeX
1. Would be useful to had *.idea files thumbnails in windows explorer (and other platforms) ;)
2. Would be great if IdeaMaker wouldn't close itself while there is a uploading still going on.
3. I've got slicing issue: I used 8 bottom and 8 top solid fill layers (as lines) with 3 top and 3 bottom surfaces solid fill (as concentric) but I get 1st layer as lines and then 2 layers as concentric. At top it works right (5 as lines and 3 as concentric)
4. Align together command works not great. Just place my models out of the bed...
5. Would be useful to use Place On Platform for all models at all heights and put it to bed. As for now it works like with a Group of the models... I need to select every model and put in on the table.. =/

Re: ideaMaker 3.5.0-Beta Release Notes

Posted: Mon Feb 17, 2020 11:04 pm
by Vicky@Raise3D
1. Tanks for your suggestions! This feature has been added into our developing list.
2. We will try to optimize this in futur versions.
3. Please check your Per-layer settings. Or if you'd like to share your .idea and .gcode files with us we can help check.
4. The Align together will ue the original position of the models when they were designed.
5. To carry out some operations for a group of models at one time will have an issue that the relative position for each model need to be kept the same as it was before the operation. So it's not possible to do a Z direction change at the same time for all models at one time.