Flowrate Bug

Discussions about ideaMaker and other printing software.
Posts: 1
Joined: Sun Jul 21, 2019 11:11 am

Flowrate Bug

Postby panas78 » Sun Jul 21, 2019 11:19 am

I am using ideamaker as my slicing software on a custom 3d printer.
I noticed a bug regarding flowrate :

I created a new printer type to reflect my printer dimensions.I also created new slicing templates for this printer.
No matter what filament type i choose ,in the gcode file the M221 command regarding the flowrate is always 90 : M221 T0 S90.00
I also tried to create new filament types with no lack ,same problem.
I've changed the flowrate on the filament to a new value,same problem.

If i use an existing printer type from the pre installed printer types everything works as expected.
I am on the latest version.

User avatar
Posts: 5727
Joined: Fri Mar 25, 2016 3:54 am

Re: Flowrate Bug

Postby Vicky@Raise3D » Tue Jul 23, 2019 12:54 am

There is an option under Advande to override flowrate.
https://support.raise3d.com/ideaMaker/5 ... 5-443.html

Return to “Software”

Who is online

Users browsing this forum: No registered users and 2 guests