Dual Nozzle Profiles

Discussions about ideaMaker and other printing software.
veryevil
Posts: 1
Joined: Fri Jun 28, 2019 7:10 am

Dual Nozzle Profiles

Postby veryevil » Fri Jun 28, 2019 7:14 am

Hi, I'm I am trying to set my printer up with a 0.8mm nozzle and a 0.4mm nozzle so I can do large and detailed work without having to switch all the time.

Can I create a left nozzle 0.4mm profile and an right 0.8mm profile and then select which items use which nozzle?

Thanks

User avatar
Vicky@Raise3D
Posts: 5456
Joined: Fri Mar 25, 2016 3:54 am

Re: Dual Nozzle Profiles

Postby Vicky@Raise3D » Sat Jun 29, 2019 12:07 am

If you want to apply different nozzles with different settings for different structures in one model, you will need build a filament template for this different size nozzle and build filament override settings for it.
If you want to apply different settings for different nozzles for different models, you can use Pre-Group settings to set models to be in different groups and give different settings for each group.


Return to “Software”

Who is online

Users browsing this forum: No registered users and 2 guests