Use group settings to control Brim ideaMaker

Discussions about ideaMaker and other printing software.
Kevin
Posts: 1
Joined: Thu Sep 27, 2018 3:54 pm

Use group settings to control Brim ideaMaker

Postby Kevin » Thu Sep 27, 2018 4:04 pm

Hi,
I have a small problem and would like to see if I am missing an easy way to solve it.
I am printing two models once and would like to be able to use a brim on one and a Skirt on the other.

I think the Group settings would allow this but I don't see an option to control bed adhesion parameters under Group Settings.

Am I missing a way to do this or is the ability not supported yet?

Printer is Pro2, ideaMaker 3.1.7
Thanks!

User avatar
Vicky@Raise3D
Posts: 8329
Joined: Fri Mar 25, 2016 3:54 am

Re: Use group settings to control Brim ideaMaker

Postby Vicky@Raise3D » Thu Sep 27, 2018 10:49 pm

Seems we haven't opened any support for such kind of needs yet. Will feedback to software team.

aerm3564
Posts: 1
Joined: Tue Jan 11, 2022 11:52 pm

Re: Use group settings to control Brim ideaMaker

Postby aerm3564 » Tue Jan 11, 2022 11:55 pm

Adding a brim for different models using groups still does not show as an option. Is there a work around?

User avatar
Vicky@Raise3D
Posts: 8329
Joined: Fri Mar 25, 2016 3:54 am

Re: Use group settings to control Brim ideaMaker

Postby Vicky@Raise3D » Wed Jan 12, 2022 1:10 am

It is under developing togetehr with Rafe selection. They are still having conflicts with each other, so we need run more tests to figure out how to make it work.


Return to “Software”

Who is online

Users browsing this forum: No registered users and 2 guests