Send gcode to printer, hit print, heats up, nothing happens

[muzzlitebeer]

Hi.
I'm getting back into 3D printing after about a year off. I dabbled with IdeaMaker and liked the interface as it is similar to S3D.

Anyway, I've set up my profiles/templates but when I create the gcode and send it to any of my printers (All have SKR 1.3 boards and Klipper/Fluidd) The hotend and heater bed both heat up to the desired temperature, then it homes and just stops.

I get this in the console;

16:05:32
File opened:ideamaker ender bin plug v1.gcode Size:8775146
16:05:32 File selected
16:08:00 // Unknown command:"M572"
16:08:19 !! Move out of range: 60.000 -2.000 0.192 [0.000]

Firstly, it looks like M572 has something to do with Pressure Advance, but I don't have Pressure Advance set up.
Is the Move out of range warning showing X, Y & Z coordinates?

Could someone please advise on how to fix this?

Cheers

[muzzlitebeer]

I worked it out.
Deleted the first 2 lines of the Start gcode.
changed 'Y-2' to 'Y2, but then to 'Y5' as it was extruding in mid air.