Feature request: Visual adjustment of fixed seam like rotation/move

Discussions about ideaMaker and other printing software.
FOGD.NO
Posts: 92
Joined: Wed Mar 25, 2020 7:42 am

Feature request: Visual adjustment of fixed seam like rotation/move

Postby FOGD.NO » Sat May 16, 2020 10:13 am

When I place a model I have small room where I could place the seam and get a perfect print. So a place where the seam does not matter. Now I have tried wity some X/Y setting by using numbers, but when I placed two models the first got correct placement, while the other got it placed somewhere else. I think this could be done much easier if you get a rotation tool for the start-stop and have choice of from-to Z heigh, each layer or for the whole model.

User avatar
Vicky@Raise3D
Posts: 6464
Joined: Fri Mar 25, 2016 3:54 am

Re: Feature request: Visual adjustment of fixed seam like rotation/move

Postby Vicky@Raise3D » Tue May 19, 2020 12:42 am

Are you looking for different starting point solutions on different models? Or different solutions on different sections of one model?
Would you mind to share some pictures of gcode preview which is having issues with us to show us the issue?

FOGD.NO
Posts: 92
Joined: Wed Mar 25, 2020 7:42 am

Re: Feature request: Visual adjustment of fixed seam like rotation/move

Postby FOGD.NO » Tue May 19, 2020 7:00 am

Vicky@Raise3D wrote:Are you looking for different starting point solutions on different models? Or different solutions on different sections of one model?
Would you mind to share some pictures of gcode preview which is having issues with us to show us the issue?


https://youtu.be/Nsgcj4Iypvk

If you notice here, it is very cumbersome method to adjust the position of the fixed seam, and the position is the same for several models.

So a visual aid where you could move a X or dot to the place where you want the seam for each object would be perfect.

User avatar
Vicky@Raise3D
Posts: 6464
Joined: Fri Mar 25, 2016 3:54 am

Re: Feature request: Visual adjustment of fixed seam like rotation/move

Postby Vicky@Raise3D » Sat May 23, 2020 12:28 am

Would you like to advise whether you are looking for:
1. Using 3D mode to show the starting points of all the models with 3D Brush.
2. Using Top View Mode to show the starting points XY values.

FOGD.NO
Posts: 92
Joined: Wed Mar 25, 2020 7:42 am

Re: Feature request: Visual adjustment of fixed seam like rotation/move

Postby FOGD.NO » Sat May 23, 2020 8:08 am

Vicky@Raise3D wrote:Would you like to advise whether you are looking for:
1. Using 3D mode to show the starting points of all the models with 3D Brush.
2. Using Top View Mode to show the starting points XY values.


Both method if possible, but the 3d view and then just click on the position would be great. Then you could just rotate the model and find the best spot.


Return to “Software”

Who is online

Users browsing this forum: No registered users and 2 guests