Stop just one extruder during fail in duplication or mirror mode

Pooch
Posts: 1
Joined: Sun Aug 07, 2022 6:53 am

Stop just one extruder during fail in duplication or mirror mode

Postby Pooch » Sun Aug 07, 2022 6:57 am

In the case of a single side failing in duplication or mirror mode is it possible to terminate just one extruder so the other can still finish? Wasn't seeing an obvious way to do that. Tried turning the feedrate down to 0 on one extruder in the tune menu but apparently that changes both in mirror mode?

User avatar
Ryan@Raise3D
Posts: 604
Joined: Thu Oct 28, 2021 10:43 pm

Re: Stop just one extruder during fail in duplication or mirror mode

Postby Ryan@Raise3D » Sat Aug 13, 2022 12:28 am

Unfortunaly the way that the printer runs both print heads at the same time is by running them both in tandem off the same gcode and in this mode any adjustment to one will affect the other as we are modifying the same code.

lumenmesh
Posts: 12
Joined: Thu Mar 31, 2022 12:34 pm

Re: Stop just one extruder during fail in duplication or mirror mode

Postby lumenmesh » Sun Aug 21, 2022 2:06 am

Easy way to solve that issue is just removing the filament of the extruder that’s messed up


Return to “E2”

Who is online

Users browsing this forum: No registered users and 2 guests