Error: X and U axis will crash

TLN-dys
Posts: 4
Joined: Mon Nov 22, 2021 11:15 am

Error: X and U axis will crash

Postby TLN-dys » Mon Nov 22, 2021 11:23 am

Hi everyone

This morning, when trying to print something, my E2 told me :
"Error: X and U axis will crash: G1 X20 y0-200 F140 E30 xPos: 3.00 uPos:20.00 ok2"

I tried to reboot, to update the firmware...with no luck.
The file was correctly printed on a Raise3D Pro2

Could someone give me some clue to what's happening here?

User avatar
Ryan@Raise3D
Posts: 81
Joined: Thu Oct 28, 2021 10:43 pm

Re: Error: X and U axis will crash

Postby Ryan@Raise3D » Mon Nov 22, 2021 10:50 pm

The error you are encountering is the printer detecting that the Gcode has the print heads navigating where they cannot reach and to fix this will require the model orientation and position to be adjusted to fix this. If ideamaker is not giving you an error beforehand then you will need to update to the latest version to correct this.

TLN-dys
Posts: 4
Joined: Mon Nov 22, 2021 11:15 am

Re: Error: X and U axis will crash

Postby TLN-dys » Wed Nov 24, 2021 1:11 pm

Thank you for your help
IdeaMaker did not give any error.
I resliced the file, rebooted the printer and everything was fine.
What is the U axis?

User avatar
Ryan@Raise3D
Posts: 81
Joined: Thu Oct 28, 2021 10:43 pm

Re: Error: X and U axis will crash

Postby Ryan@Raise3D » Wed Nov 24, 2021 10:44 pm

the U axis is the name of the right side print head as we cannot have 2 X-axis variables.


Return to “E2”

Who is online

Users browsing this forum: No registered users and 1 guest