E2 duplication problems

sperman
Posts: 88
Joined: Mon Jul 10, 2017 2:01 pm

E2 duplication problems

Postby sperman » Thu Oct 14, 2021 11:24 am

I'm hoping someone can offer some advice for using the E2 in duplication mode.

If I don't use a raft, one side doesn't stick to the bed. If I do use a raft, it is impossible to remove the parts from the raft.

Timo
Posts: 17
Joined: Thu Jul 02, 2020 10:05 pm

Re: E2 duplication problems

Postby Timo » Thu Oct 14, 2021 7:22 pm

Try use brims. (platform additions). I use an electronic cleaning spray or similar to clean print bed before print. Usually it help. Make your first layer extrusion persentage(layer in ideamaker) like 150% or smt. So that first layer stick better. I have never used rafts. Few times problems whit part dont stick in bed.


Return to “E2”

Who is online

Users browsing this forum: No registered users and 2 guests