Board Error 3030

Drmaybe
Posts: 2
Joined: Thu Jun 24, 2021 6:33 am

Board Error 3030

Postby Drmaybe » Thu Jun 24, 2021 6:47 am

I keep getting Error 3030: z probe already triggered at start of probing move. I'm not sure how to fix it, is there a mechanical fault or is it a simple adjustment that will fix it.



I have included the log file.
Attachments
all-raisetouch-1068-20210623201000.tar.gz
(1.65 MiB) Downloaded 6 times

User avatar
Steven@Raise3D
Posts: 399
Joined: Thu Dec 17, 2020 11:24 pm

Re: Board Error 3030

Postby Steven@Raise3D » Fri Jun 25, 2021 1:50 am

Drmaybe wrote:I keep getting Error 3030: z probe already triggered at start of probing move. I'm not sure how to fix it, is there a mechanical fault or is it a simple adjustment that will fix it.



I have included the log file.


It sounds like the physical probe may be having issues. I would suggest creating a support ticket so that one of our technical support engineers can better assist you in solving the issue.

Drmaybe
Posts: 2
Joined: Thu Jun 24, 2021 6:33 am

Re: Board Error 3030

Postby Drmaybe » Mon Jun 28, 2021 8:08 am

I manage to fix it myself; I took apart the extruder head and cleaned it. I also made sure that the z prob could move freely. After that, I have to do an offset calibration, and it is good to go.

The printer wants PLA for offset calibration. Is it not possible to use ASA?

User avatar
Steven@Raise3D
Posts: 399
Joined: Thu Dec 17, 2020 11:24 pm

Re: Board Error 3030

Postby Steven@Raise3D » Thu Jul 01, 2021 1:52 am

Drmaybe wrote:I manage to fix it myself; I took apart the extruder head and cleaned it. I also made sure that the z prob could move freely. After that, I have to do an offset calibration, and it is good to go.

The printer wants PLA for offset calibration. Is it not possible to use ASA?


Glad to hear you fixed the issue.

The PLA calibration should be a good starting offset for all materials. If you are printing some exotic materials like PC and you are noticing that they stick too well you can adjust the offset manually.


Return to “E2”

Who is online

Users browsing this forum: No registered users and 2 guests