E2 Gantry rail length

Stalebread2008
Posts: 22
Joined: Tue Mar 16, 2021 2:56 am

E2 Gantry rail length

Postby Stalebread2008 » Mon Apr 05, 2021 12:30 pm

Hi does anyone know the length of the gantry rail on the E2?

User avatar
Steven@Raise3D
Posts: 350
Joined: Thu Dec 17, 2020 11:24 pm

Re: E2 Gantry rail length

Postby Steven@Raise3D » Wed Apr 07, 2021 12:28 am

Stalebread2008 wrote:Hi does anyone know the length of the gantry rail on the E2?


The length of the linear rail on the X-axis is 425mm.

Stalebread2008
Posts: 22
Joined: Tue Mar 16, 2021 2:56 am

Re: E2 Gantry rail length

Postby Stalebread2008 » Thu Apr 08, 2021 7:08 pm

Steven@Raise3D wrote:
Stalebread2008 wrote:Hi does anyone know the length of the gantry rail on the E2?


The length of the linear rail on the X-axis is 425mm.



Do you know the rail hole spacing, and distance from the edge to first hole, block length and hole spacing? Sorry if its too much. Thanks.

Stalebread2008
Posts: 22
Joined: Tue Mar 16, 2021 2:56 am

Re: E2 Gantry rail length

Postby Stalebread2008 » Thu Apr 08, 2021 9:16 pm

Nevermind I got them, but a confirmation would be nice

User avatar
Steven@Raise3D
Posts: 350
Joined: Thu Dec 17, 2020 11:24 pm

Re: E2 Gantry rail length

Postby Steven@Raise3D » Tue Apr 13, 2021 10:21 pm

Stalebread2008 wrote:Nevermind I got them, but a confirmation would be nice


From the edge of the rail to the first fastener is 10mm

The distance between each fastener is 25mm from center point to center point.

Stalebread2008
Posts: 22
Joined: Tue Mar 16, 2021 2:56 am

Re: E2 Gantry rail length

Postby Stalebread2008 » Sat Apr 17, 2021 7:14 pm

Steven@Raise3D wrote:
Stalebread2008 wrote:Nevermind I got them, but a confirmation would be nice


From the edge of the rail to the first fastener is 10mm

The distance between each fastener is 25mm from center point to center point.


10mm to the edge of the first hole or the center?

User avatar
Steven@Raise3D
Posts: 350
Joined: Thu Dec 17, 2020 11:24 pm

Re: E2 Gantry rail length

Postby Steven@Raise3D » Tue Apr 20, 2021 12:08 am

Stalebread2008 wrote:
Steven@Raise3D wrote:
Stalebread2008 wrote:Nevermind I got them, but a confirmation would be nice


From the edge of the rail to the first fastener is 10mm

The distance between each fastener is 25mm from center point to center point.


10mm to the edge of the first hole or the center?


10mm to the edge of the fastner.

Stalebread2008
Posts: 22
Joined: Tue Mar 16, 2021 2:56 am

Re: E2 Gantry rail length

Postby Stalebread2008 » Sat Apr 24, 2021 9:09 pm

Steven@Raise3D wrote:
Stalebread2008 wrote:
Steven@Raise3D wrote:
From the edge of the rail to the first fastener is 10mm

The distance between each fastener is 25mm from center point to center point.


10mm to the edge of the first hole or the center?


10mm to the edge of the fastner.


So would that be 12.5 from the center?

User avatar
Steven@Raise3D
Posts: 350
Joined: Thu Dec 17, 2020 11:24 pm

Re: E2 Gantry rail length

Postby Steven@Raise3D » Wed Apr 28, 2021 12:12 am

Stalebread2008 wrote:
Steven@Raise3D wrote:
Stalebread2008 wrote:
10mm to the edge of the first hole or the center?


10mm to the edge of the fastner.


So would that be 12.5 from the center?


Yes, from the edge to the center of the first fastener would be 12.5mm.


Return to “E2”

Who is online

Users browsing this forum: No registered users and 2 guests