E2 - Temperature is raising to slowly errorcode

Allram
Posts: 66
Joined: Sat May 02, 2020 1:18 pm

E2 - Temperature is raising to slowly errorcode

Postby Allram » Mon Jan 11, 2021 6:21 pm

Hello,

I get this error message on my E2, i can't see why, as the temperature is raising just as it should..How can i increase the "range" that has this setting? How can i adjust it from 1.7°C to t.ex 1°C?

Code: Select all

| raisetouch| serial: Error: Heating fault on heater 1, temperature rising much more slowly than the expected 1.7°C/

User avatar
Steven@Raise3D
Posts: 86
Joined: Thu Dec 17, 2020 11:24 pm

Re: E2 - Temperature is raising to slowly errorcode

Postby Steven@Raise3D » Tue Jan 12, 2021 2:22 am

Allram wrote:Hello,

I get this error message on my E2, i can't see why, as the temperature is raising just as it should..How can i increase the "range" that has this setting? How can i adjust it from 1.7°C to t.ex 1°C?

Code: Select all

| raisetouch| serial: Error: Heating fault on heater 1, temperature rising much more slowly than the expected 1.7°C/



Would you be able to provide the latest serial log for me to review? https://support.raise3d.com/E2/how-to-e ... -1216.html

Allram
Posts: 66
Joined: Sat May 02, 2020 1:18 pm

Re: E2 - Temperature is raising to slowly errorcode

Postby Allram » Tue Jan 12, 2021 1:14 pm

It seems to be solved with running a PID-autotune with the fans on full power.


Return to “E2”

Who is online

Users browsing this forum: No registered users and 1 guest