E2 Paused printing

Proschi3d
Posts: 138
Joined: Tue Nov 03, 2020 7:13 am
Location: Deutschland
Contact:

E2 Paused printing

Postby Proschi3d » Fri Dec 18, 2020 9:39 pm

I can no longer believe that there are few who have this problem.
When I use my printer normally via the Raise 3d Display and Controlboard, it pauses.
but if I connect it to the PC or Octoprint via USB, everything is perfect! why raise 3 D
Raise 3D E2, Prusa i 3 Mk3s Mmus2

https://www.instagram.com/proschi3d/

User avatar
Steven@Raise3D
Posts: 350
Joined: Thu Dec 17, 2020 11:24 pm

Re: E2 Paused printing

Postby Steven@Raise3D » Sat Dec 19, 2020 6:10 am

Can you please clarify the issue? Does it pause for a moment then continue printing? Or does the print completely stop? When a file is printed via USB it is loaded onto the internal memory of the screen then printed. It is not streaming directly from the USB device.

Proschi3d
Posts: 138
Joined: Tue Nov 03, 2020 7:13 am
Location: Deutschland
Contact:

Re: E2 Paused printing

Postby Proschi3d » Sat Dec 19, 2020 7:13 am

You misunderstood me. I unplugged the usb cable from the motionboard and plugged in my Raspberry pi instead of the controller of the display. Then sent the gcode from octoprint via the Raspberry. So it prints without errors. It stutters when printing only via the raise controller
Raise 3D E2, Prusa i 3 Mk3s Mmus2

https://www.instagram.com/proschi3d/

Proschi3d
Posts: 138
Joined: Tue Nov 03, 2020 7:13 am
Location: Deutschland
Contact:

Re: E2 Paused printing

Postby Proschi3d » Sat Dec 19, 2020 7:34 am

Here are two examples where the printer is paused; gcode was sent to the motion board via the raise controller

https://youtu.be/esYPmuN4yWE

https://youtu.be/oTwaAePwyBw
Raise 3D E2, Prusa i 3 Mk3s Mmus2

https://www.instagram.com/proschi3d/

modiug
Posts: 19
Joined: Sat Oct 10, 2020 9:54 pm

Re: E2 Paused printing

Postby modiug » Sat Dec 19, 2020 1:38 pm

I can confirm the same problem. +1

leonhart8888
Posts: 81
Joined: Tue Jul 07, 2020 12:02 am

Re: E2 Paused printing

Postby leonhart8888 » Sat Dec 19, 2020 6:04 pm

Interesting that yours pauses and then resumes. My machine doesn't do that but occasionally stops forever and then errors out with a serial error which requires rebooting and resuming a print.

They've sent me a new usb cable but it doesn't seem to solve the issue and now waiting on a main board replacement.

Proschi3d
Posts: 138
Joined: Tue Nov 03, 2020 7:13 am
Location: Deutschland
Contact:

Re: E2 Paused printing

Postby Proschi3d » Sat Dec 19, 2020 6:53 pm

I already got a new motion board and a new controller. However, this did not fix the error.
Why doesn't a technician care about the problem here in the forum? every time you describe a problem here, it is not addressed. It always just comes up have a gcode, video? The second step is then the service ticket ..... you will then be forwarded to a seller in Germany.sorry if I have obvious problems with my product, then I try to solve them with the customer.
Raise 3D E2, Prusa i 3 Mk3s Mmus2

https://www.instagram.com/proschi3d/

Proschi3d
Posts: 138
Joined: Tue Nov 03, 2020 7:13 am
Location: Deutschland
Contact:

Re: E2 Paused printing

Postby Proschi3d » Tue Dec 22, 2020 8:38 pm

Why are you not interested in solving the problem?
Raise 3D E2, Prusa i 3 Mk3s Mmus2

https://www.instagram.com/proschi3d/

larselektriker
Posts: 6
Joined: Sat Oct 17, 2020 7:37 am

Re: E2 Paused printing

Postby larselektriker » Sun Jan 10, 2021 1:05 pm

mine does that too, but only the right side...

User avatar
Steven@Raise3D
Posts: 350
Joined: Thu Dec 17, 2020 11:24 pm

Re: E2 Paused printing

Postby Steven@Raise3D » Tue Jan 12, 2021 2:05 am

Please create a support ticket so that one of our technical support engineers can assist you in solving the issue. https://help.raise3d.com/support/home

modiug
Posts: 19
Joined: Sat Oct 10, 2020 9:54 pm

Re: E2 Paused printing

Postby modiug » Tue Jan 12, 2021 8:34 am

Steven@Raise3D wrote:Please create a support ticket so that one of our technical support engineers can assist you in solving the issue. https://help.raise3d.com/support/home


Not possible, we are from Europe and the ticket will be bounce.

GM

Proschi3d
Posts: 138
Joined: Tue Nov 03, 2020 7:13 am
Location: Deutschland
Contact:

Re: E2 Paused printing

Postby Proschi3d » Tue Jan 12, 2021 10:13 am

more and more people have this problem. Maybe someone cares about a solution here? I think a lot of them have this problem and don't notice.
Raise 3D E2, Prusa i 3 Mk3s Mmus2

https://www.instagram.com/proschi3d/

Blue21
Posts: 150
Joined: Sat Jun 06, 2020 8:04 am
Location: Switzerland

Re: E2 Paused printing

Postby Blue21 » Wed Jan 13, 2021 6:50 am

modiug wrote:
Steven@Raise3D wrote:Please create a support ticket so that one of our technical support engineers can assist you in solving the issue. https://help.raise3d.com/support/home


Not possible, we are from Europe and the ticket will be bounce.

GM

So true, you think you will get help till they realize you are in Europe and the ticket is closed and you have to go to your dealer and then DIY is the best way, no direct manufacturer support.
E2 + Prusa Mini <- UM 2+ <- Replicator2

Markus64
Posts: 334
Joined: Thu Feb 27, 2020 4:57 pm
Location: Germany

Re: E2 Paused printing

Postby Markus64 » Wed Jan 13, 2021 12:46 pm

Normally, every advertisement that is published in Europe should say that the manufacturer does not offer direct support! The way it is handled now, a European customer only notices this when he requests help but does not receive it. That should be forbidden!

modiug
Posts: 19
Joined: Sat Oct 10, 2020 9:54 pm

Re: E2 Paused printing

Postby modiug » Wed Jan 13, 2021 1:28 pm

I agree with you all.
My curiosity is: is it possible that there is not an American with this problem?
GM

Proschi3d
Posts: 138
Joined: Tue Nov 03, 2020 7:13 am
Location: Deutschland
Contact:

Re: E2 Paused printing

Postby Proschi3d » Wed Jan 13, 2021 1:33 pm

modiug wrote:I agree with you all.
My curiosity is: is it possible that there is not an American with this problem?
GM


is probably rather unlikely.
Have you already tried something to fix the error?
should we open a thread that has already been tried?
Raise 3D E2, Prusa i 3 Mk3s Mmus2

https://www.instagram.com/proschi3d/

Markus64
Posts: 334
Joined: Thu Feb 27, 2020 4:57 pm
Location: Germany

Re: E2 Paused printing

Postby Markus64 » Wed Jan 13, 2021 3:11 pm

How does your dealer react when you confront them with the problem?

Proschi3d
Posts: 138
Joined: Tue Nov 03, 2020 7:13 am
Location: Deutschland
Contact:

Re: E2 Paused printing

Postby Proschi3d » Fri Jan 15, 2021 10:43 pm

ok i have solved the problem of pausing ..;)

But please don't be angry that I won't publish it ... I think Raise 3D has to deliver;)
Raise 3D E2, Prusa i 3 Mk3s Mmus2

https://www.instagram.com/proschi3d/

modiug
Posts: 19
Joined: Sat Oct 10, 2020 9:54 pm

Re: E2 Paused printing

Postby modiug » Fri Jan 15, 2021 11:51 pm

Proschi3d wrote:ok i have solved the problem of pausing ..;)

But please don't be angry that I won't publish it ... I think Raise 3D has to deliver;)


I just had a perfect print from a previously paused gcode... I don't have the solution but maybe some clues...

GM

ww007
Posts: 8
Joined: Wed Dec 09, 2020 7:56 pm

Re: E2 Paused printing

Postby ww007 » Sat Jan 16, 2021 8:37 am

I believe I have the same problem... the print head will stop in place for about 1 second seemingly at random. Is this thread referring to the same problem:

https://forum.raise3d.com/viewtopic.php?f=20&t=21082

I'm not sure if this problem is causing any printing defects, but I do notice the same blobs on my printed that the other thread mentions, mainly when I'm printing circular objects. I haven't watched the prints closely enough to tell if that is the source of the blob problem.

To the other posters that think they have figured out the problem, any reason why you're not sharing? This might be a widespread issue that other owners have not yet noticed.

I do hope Raise3D is looking into a fix for the next firmware update.


Return to “E2”

Who is online

Users browsing this forum: Drmaybe and 1 guest