Change filament options in load/unload touch screen

leonhart8888
Posts: 17
Joined: Tue Jul 07, 2020 12:02 am

Change filament options in load/unload touch screen

Postby leonhart8888 » Tue Jul 14, 2020 12:40 am

The touch screen has some preset filament options for loading and unloading. They more or less work for all the filaments I'm using ... but just wondering if and how you can change those options (eg. Create a BVOH profile).

Thanks.

User avatar
Vicky@Raise3D
Posts: 6925
Joined: Fri Mar 25, 2016 3:54 am

Re: Change filament options in load/unload touch screen

Postby Vicky@Raise3D » Wed Jul 15, 2020 1:07 am

If you are using E2, you can use the arrows above and below the temperature reading in the load menu to manually change the temperature at which that material will load at. Once it is manually changed it will be saved and when you return to the load menu and select that material it will have the correct temperature for loading.

leonhart8888
Posts: 17
Joined: Tue Jul 07, 2020 12:02 am

Re: Change filament options in load/unload touch screen

Postby leonhart8888 » Wed Jul 15, 2020 5:22 am

Ok that works, thanks Vicki!

Is there any way to add new profiles to the E2 touchscreen selections though? Just curious.

User avatar
Vicky@Raise3D
Posts: 6925
Joined: Fri Mar 25, 2016 3:54 am

Re: Change filament options in load/unload touch screen

Postby Vicky@Raise3D » Thu Jul 16, 2020 9:34 pm

You can do it on touchscreen.
In Load/Unload page, you can enter Fialemnt Templates by touchscreen the Filament on Left or Right nozzle.
Then you will see an arrow at right side above weight., Touch it then you can enter the page to Add or Modify the templates.

leonhart8888
Posts: 17
Joined: Tue Jul 07, 2020 12:02 am

Re: Change filament options in load/unload touch screen

Postby leonhart8888 » Fri Jul 17, 2020 8:40 pm

Great thanks! I will try that next time. Cheers.


Return to “E2”

Who is online

Users browsing this forum: No registered users and 1 guest