Page 1 of 1

Fan Duct Support

Posted: Wed Aug 03, 2016 7:54 am
by Vicky@Raise3D
Dear Raisers,

We find a serious problem of the printed fan duct for side cooling fan these days:
The support of fan duct hasn't been removed in our factory.
2.png


Please check whether the fan ducts on your printer have such problem. If so, please peel the support off. It may affect cooling effect for your prints.

It's a serious problem. We have traced the responsibility in our factory. We will lay the fan duct down to print and won't allow such problem happen again.

We apologize for this problem. :(

Re: Fan Duct Support

Posted: Wed Aug 03, 2016 2:35 pm
by Nikolaus
Dear Vicky, where can i get a spare fan duct mine is broken after two prints( just peeled off between layers, a bit crappy) or do you have an stl. so i can print my own?
thanks in advance

Re: Fan Duct Support

Posted: Wed Aug 03, 2016 2:50 pm
by Matthew Lozano
Speaking of, why are the STL's not in the downloads section, seems like it would be simpler for everyone if we did not need to ask every time or search around on the forum for a post with the links.

Re: Fan Duct Support

Posted: Wed Aug 03, 2016 2:57 pm
by woofy

Re: Fan Duct Support

Posted: Wed Aug 03, 2016 3:02 pm
by woofy
It's pinned in the General - Announcements section.
Should be in the Hardware Forum really!

Re: Fan Duct Support

Posted: Wed Aug 03, 2016 3:05 pm
by Matthew Lozano
Oh right, forgot about that post:) Though still could be put in the downloads area. http://www.raise3d.com/pages/download

Re: Fan Duct Support

Posted: Thu Aug 04, 2016 3:18 am
by Vicky@Raise3D
Matthew Lozano wrote:Oh right, forgot about that post:) Though still could be put in the downloads area. http://www.raise3d.com/pages/download


Thanks for your suggestion. We will upload the stls to download page later.

Re: Fan Duct Support

Posted: Sun Aug 07, 2016 5:41 am
by lylewaters
Matthew Lozano wrote:Speaking of, why are the STL's not in the downloads section, seems like it would be simpler for everyone if we did not need to ask every time or search around on the forum for a post with the links.

I agree this should be in the downloads section. Not every user is on the forums.