Purge Pile Problems

Thoughts about Raise3D, 3D printing and making in general.
Posts: 1
Joined: Tue Sep 15, 2020 7:29 am

Purge Pile Problems

Postby babarfirasat » Tue Sep 15, 2020 7:47 am

Hi All,

We got a Raise3D pro 2 Plus printer yesterday. I tried to print of the torture test boat. The printer has dual extruders on it. The left extruder is set to PLA ad the right on is set to PVA to create supports but I'm having trouble with the purge pile getting stuck to the nozzle every time the printer begins to print as well as when the printer moves to the side and switches nozzle. The boat has to create a wipe tower a wipe wall too, it creates blobs which get stuck to the print. I have attached images which show the model in ideamaker and what the actual print turned out to be.

I have also tried another print with higher temperatures but it still did not work.


Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest