Pro 2 out of filament mid print

Thoughts about Raise3D, 3D printing and making in general.
Posts: 1
Joined: Mon Feb 11, 2019 2:21 pm

Pro 2 out of filament mid print

Postby Mddesign » Mon Feb 11, 2019 2:23 pm

We had a print over the weekend run out of filament. The machine recognized this stopped and moved to home. However, we cannot resume the print. It is no longer loaded on the info screen of the printer itself either. Are we missing a setting to be able to resume the print? Does the memory of where it stopped only last so long? It is unfortunate it appears we need to restart this print.

User avatar
Posts: 5061
Joined: Fri Mar 25, 2016 3:54 am

Re: Pro 2 out of filament mid print

Postby Vicky@Raise3D » Mon Feb 11, 2019 10:58 pm

Would you like to advise what message shows on touchscreen after you completed re-load the filament back to printer?
There should have no limitation of the print resume for storage space or time. Even you power off the printer, the print status should be saved into touchscreen.
If you don't remember all the details clearly, would you mind run a test print and cut the filament off during the printing and record what happens then?

Return to “General”

Who is online

Users browsing this forum: No registered users and 2 guests