Scaling is wrong

Thoughts about Raise3D, 3D printing and making in general.
Monty
Posts: 87
Joined: Wed Oct 19, 2016 6:13 pm

Scaling is wrong

Postby Monty » Thu Dec 08, 2016 12:17 am

When I used to re scale a model it used to show all the 3 % as 100 and I could then drop it down by % on all 3 sides. Now it shows a different % on all 3 and if you change 1 it throws all the others out . Is there a fix for this ?

Monty
Posts: 87
Joined: Wed Oct 19, 2016 6:13 pm

Re: Scaling is wrong

Postby Monty » Thu Dec 08, 2016 12:38 am

this happens after you have moved or rotated the model. If you do scaling first is doesn't happen

User avatar
walshlg
Posts: 1350
Joined: Wed Mar 23, 2016 12:01 pm

Re: Scaling is wrong

Postby walshlg » Thu Dec 08, 2016 2:01 am

there is a check box for uniform scaling

Monty
Posts: 87
Joined: Wed Oct 19, 2016 6:13 pm

Re: Scaling is wrong

Postby Monty » Thu Dec 08, 2016 2:22 pm

Yes that has nothing to do with the fault. Also if you tick that is changes to size of the model as well so thats also faulty

User avatar
Vicky@Raise3D
Posts: 6973
Joined: Fri Mar 25, 2016 3:54 am

Re: Scaling is wrong

Postby Vicky@Raise3D » Sat Dec 10, 2016 5:44 pm

Thanks for your feedback.
I also find some abnormal when doing scale after rotating. We will check what's wrong with it.

User avatar
walshlg
Posts: 1350
Joined: Wed Mar 23, 2016 12:01 pm

Re: Scaling is wrong

Postby walshlg » Sat Dec 10, 2016 9:31 pm

oh yes, definitely scale first then rotate

User avatar
basilfawlty
Posts: 69
Joined: Sat Aug 06, 2016 5:29 am

Re: Scaling is wrong

Postby basilfawlty » Thu Dec 15, 2016 10:22 pm

I have the same problem. Especially if I open an existing file and try to scale it. This behavior is new since the last update to ideamaker.
Raise3D N2+

p-trax
Posts: 28
Joined: Mon Sep 05, 2016 9:43 pm

Re: Scaling is wrong

Postby p-trax » Tue Jan 03, 2017 11:20 am

Any fix for this yet?

User avatar
Vicky@Raise3D
Posts: 6973
Joined: Fri Mar 25, 2016 3:54 am

Re: Scaling is wrong

Postby Vicky@Raise3D » Wed Jan 04, 2017 7:41 am

We have already found out where the problem is. Will fix in next version.


Return to “General”

Who is online

Users browsing this forum: No registered users and 2 guests