Hinge Cover System for the Raise3D N2/N2+ and Pro Cover

Thoughts about Raise3D, 3D printing and making in general.
GWC
Posts: 11
Joined: Wed Jan 10, 2018 11:27 pm

Hinge Cover System for the Raise3D N2/N2+ and Pro Cover

Postby GWC » Sat Sep 29, 2018 3:57 pm

The Infiinite Position Hinge System for the Raise 3D N2/N2+ and the Pro Cover!

Check it OUT on our website.

https://www.inspirenovations.com/produc ... ter-Covers

We love it.

IT JUST WORKS!
Attachments
Hinge Pressure Plates, 2nd pic.PNG
R3D easy access to print area.PNG
R3D Partially Opened Cover A.PNG
hinge information.PNG

3D Brad
Posts: 4
Joined: Fri Feb 22, 2019 4:43 am

Re: Hinge Cover System for the Raise3D N2/N2+ and Pro Cover

Postby 3D Brad » Sat May 18, 2019 2:52 am

I just installed the hinge system on my Pro2... works great. Should probably be standard equipment.

3D Brad
Posts: 4
Joined: Fri Feb 22, 2019 4:43 am

Re: Hinge Cover System for the Raise3D N2/N2+ and Pro Cover

Postby 3D Brad » Fri Jun 07, 2019 11:41 pm

I installed this on the spool side of my Pro 2... The hinges can be installed on any side. Works great! A very well engineered product. This solved my issue with the cover being hard to store when not in use.


Return to “General”

Who is online

Users browsing this forum: JMFX and 2 guests