Hi! We use RAISE3D E2 printer.
We got an error at the display.
Error MaxTempExceeded on heater 0
Log and screen in attach.
What shoul we do to fix it?
Thoughts about Raise3D, 3D printing and making in general.
3 posts • Page 1 of 1
Heater 0 is referring to the bed tempature and based on the log it looks like the printer is not reading a tempature at all and I reccomend inspecting the thermocouple under the bed. You can follow this guide to gain access to the thermocouple https://support.raise3d.com/E2/how-to-r ... -1042.html
Who is online
Users browsing this forum: No registered users and 2 guests