Error MaxTempExceeded on heater 0

Thoughts about Raise3D, 3D printing and making in general.
MAGENTA
Posts: 2
Joined: Wed Jan 19, 2022 9:17 am

Error MaxTempExceeded on heater 0

Postby MAGENTA » Wed Jan 19, 2022 9:30 am

Hi! We use RAISE3D E2 printer.

We got an error at the display.

Error MaxTempExceeded on heater 0
Error--001


Log and screen in attach.

What shoul we do to fix it?
Attachments
all-raisetouch-980-20220119172712.tar.gz
(476.48 KiB) Downloaded 35 times
photo_2022-01-19_11-24-53.jpg

User avatar
Ryan@Raise3D
Posts: 432
Joined: Thu Oct 28, 2021 10:43 pm

Re: Error MaxTempExceeded on heater 0

Postby Ryan@Raise3D » Tue Feb 01, 2022 1:54 am

Heater 0 is referring to the bed tempature and based on the log it looks like the printer is not reading a tempature at all and I reccomend inspecting the thermocouple under the bed. You can follow this guide to gain access to the thermocouple https://support.raise3d.com/E2/how-to-r ... -1042.html

MAGENTA
Posts: 2
Joined: Wed Jan 19, 2022 9:17 am

Re: Error MaxTempExceeded on heater 0

Postby MAGENTA » Tue Feb 01, 2022 8:03 am

Ryan, thanks for the answer!

Conclusion: As a result of the diagnosis, a factory defect of the temperature sensor was detected.The temperature sensor of the printing table has been replaced.


Return to “General”

Who is online

Users browsing this forum: No registered users and 2 guests