RaiseCloud Sliced Files Lack Heated Bed

Trogdor04
Posts: 2
Joined: Tue Dec 08, 2020 5:41 pm

RaiseCloud Sliced Files Lack Heated Bed

Postby Trogdor04 » Fri Nov 19, 2021 9:21 pm

The files I slice using the online slicer in RaiseCloud will not heat the bed of the target printer. It will heat the nozzle and go straight to printing. How do I enable this? I've made sure the settings in the profile are set for a heated bed.

User avatar
Ryan@Raise3D
Posts: 73
Joined: Thu Oct 28, 2021 10:43 pm

Re: RaiseCloud Sliced Files Lack Heated Bed

Postby Ryan@Raise3D » Sat Nov 20, 2021 1:00 am

Can you send me a screenshot of your temperature tab, your start gcode tab, and can you share a copy of your Gcode?

Trogdor04
Posts: 2
Joined: Tue Dec 08, 2020 5:41 pm

Re: RaiseCloud Sliced Files Lack Heated Bed

Postby Trogdor04 » Mon Nov 22, 2021 4:41 pm

Start G-Code...

Code: Select all

G21
G90
M82
M107
G28 X0 Y0
G28 Z0
G1 Z15.0 F300
G92 E0
G1 F140 E29
G1 X20 Y0 F140 E30
G92 E0
G1 F{travel_xy_speed}
M117 Printing...
Attachments
Screenshot 2021-11-22 113948.jpg
customer-xyzCalibration_cube(1)_fixed.gcode
(434 KiB) Downloaded 3 times

User avatar
Ryan@Raise3D
Posts: 73
Joined: Thu Oct 28, 2021 10:43 pm

Re: RaiseCloud Sliced Files Lack Heated Bed

Postby Ryan@Raise3D » Mon Nov 22, 2021 11:01 pm

can you go to printer settings at the top and ensure use heated bed is checked?


Return to “RaiseCloud”

Who is online

Users browsing this forum: No registered users and 1 guest