Pro2 Stuck on busy and still printing after stop

mcstockdale
Posts: 2
Joined: Tue Aug 13, 2019 1:21 am

Pro2 Stuck on busy and still printing after stop

Postby mcstockdale » Tue Aug 13, 2019 1:35 am

hello,

was looking around raisecloud while a job was running and found the printer temperature/feed settings tab and it looked glitched.
Screen Shot 2019-08-12 at 9.29.38 PM.png

I dont think the NaN is meant to be displayed there.
After exiting the menu, my printer temp dropped from 205C to 110C mid print without me doing anything.
I first paused the print through raisecloud, but then stopped it completely, but it seems as if neither worked, and now my printer is stuck as "busy", and still printing despite the stop request.
Screen Shot 2019-08-12 at 9.26.35 PM.png

The camera preview shows the extruder still moving despite the cooled extruder and print bed as a result of the stopped print.
The job was also cancelled but still appears in the queue.

User avatar
Vicky@Raise3D
Posts: 5521
Joined: Fri Mar 25, 2016 3:54 am

Re: Pro2 Stuck on busy and still printing after stop

Postby Vicky@Raise3D » Tue Aug 13, 2019 4:33 am

Would you like export serial log from your touchscreen and share with us so that we can see what happened in system?
It is under Settings -> More Settings -> Serial Port Log.

mcstockdale
Posts: 2
Joined: Tue Aug 13, 2019 1:21 am

Re: Pro2 Stuck on busy and still printing after stop

Postby mcstockdale » Tue Aug 13, 2019 1:15 pm

done, here they are:
all-raisetouch-1103-20190813211504.tar.gz
(154.64 KiB) Downloaded 7 times

User avatar
Vicky@Raise3D
Posts: 5521
Joined: Fri Mar 25, 2016 3:54 am

Re: Pro2 Stuck on busy and still printing after stop

Postby Vicky@Raise3D » Tue Aug 13, 2019 4:22 pm

Thanks for your help.
Sending it over to software team to help check now.

User avatar
Vicky@Raise3D
Posts: 5521
Joined: Fri Mar 25, 2016 3:54 am

Re: Pro2 Stuck on busy and still printing after stop

Postby Vicky@Raise3D » Thu Aug 15, 2019 6:14 pm

Thanks for your waiting. I have got the feedback from software team.
They have checked the log file you shared and found out that your printer is running an old version of touchscreen firmware.
We recommend you update your firmware first then see whether issue is still there or not.
You can find the latest version from the following link: https://cloud.raise3d.com/raise3d-download.html


Return to “RaiseCloud”

Who is online

Users browsing this forum: No registered users and 1 guest