Raise3D Pro2 with Cura Slicer

Yang
Posts: 4
Joined: Thu Apr 01, 2021 5:56 am

Raise3D Pro2 with Cura Slicer

Postby Yang » Thu Apr 01, 2021 6:02 am

I got the Raise3D Pro2 to work with Cura. These info might help you.
https://github.com/YangPiCui/3DPrinterC ... ise3D_Pro2

Marlin G-code
https://marlinfw.org/docs/gcode/M204.html

Cura Keywords
https://github.com/Ultimaker/Cura/blob/ ... r.def.json

Dual extrusion oozing is a pain at the moment. I prefer single extrusion.

Steadipanda
Posts: 37
Joined: Fri May 10, 2019 11:41 pm

Re: Raise3D Pro2 with Cura Slicer

Postby Steadipanda » Sat Apr 03, 2021 6:21 am

does the monitor mode work ?

I know Cura can store BL touch mesh mapping. if it can do that with pro2 would finally make this printer work....


Return to “Pro2 Series”

Who is online

Users browsing this forum: No registered users and 1 guest