Disable the leveling head on the Pro 2

joeyoro
Posts: 3
Joined: Thu Oct 24, 2019 6:45 am

Disable the leveling head on the Pro 2

Postby joeyoro » Sat Jan 04, 2020 4:37 am

I have had issues with my Pro 2 jamming since I've gotten it. I would like to have the two heads stay at a set height and print in two different nozzle sizes. Swapping between the two is not required. Is the actuator system that presses the hot end downward required? Or can the system be bypassed and have both nozzles set down at a set height and employed that way with no software issues?

User avatar
Vicky@Raise3D
Posts: 6916
Joined: Fri Mar 25, 2016 3:54 am

Re: Disable the leveling head on the Pro 2

Postby Vicky@Raise3D » Mon Jan 06, 2020 11:21 pm

I don't think there is an option in the printer you can ask the nozzles to stop jogging during printing. It has been set to jog when one nozzle is enabled to print.

Naser404
Posts: 89
Joined: Wed Jun 20, 2018 3:33 pm

Re: Disable the leveling head on the Pro 2

Postby Naser404 » Wed Jan 08, 2020 10:31 am

You can remove the servo motor that controls it, and adjust the height of nozzle. Might work.


Return to “Pro2 Series”

Who is online

Users browsing this forum: No registered users and 2 guests