New Cura 4.2.1 Pro2 Machine Settings and Profile

KS_Husker
Posts: 132
Joined: Thu Apr 26, 2018 2:32 am

New Cura 4.2.1 Pro2 Machine Settings and Profile

Postby KS_Husker » Sun Sep 29, 2019 6:14 pm

I know many have asked about settings to use their Pro2 with the new Cura.

After compiling information from multiple sources I was able to come up with a great working Machine Setting, and Printing Profile to use on the Pro2. This is for ABS and the settings are similar to the Standard settings in Ideamaker for the Pro2.

I have had great results with this, but I actually still prefer Ideamaker as a slicer.

Use at your own risk, I assume no responsibility for any issues.

I just wanted to put this out there in case it helps anyone else.
Hopefully the .zip works to download and extract.
Attachments
Cura - Pro2 - Machine Settings - G-Code.txt
G-Code Settings for Start and Stop code in Machine Settings
(286 Bytes) Downloaded 64 times
Cura - Pro2 - Standard - ABS - .4mm.zip
Cura Profile for Pro2
(1.29 KiB) Downloaded 61 times
Cura - Pro2 - Machine Settings Image 1.PNG
Cura - Pro2 - Machine Settings Image 2.PNG
Cura - Pro2 - Machine Settings Image 3.PNG

Printer
Posts: 4
Joined: Tue Oct 01, 2019 8:57 pm

Re: New Cura 4.2.1 Pro2 Machine Settings and Profile

Postby Printer » Wed Oct 02, 2019 7:25 am

Thaks for the Setting.

I also prefer ideamaker as a slicer, but too use Cura for another printers.


Return to “Pro2 Series”

Who is online

Users browsing this forum: No registered users and 2 guests