Broken Fan Duct

claytony565
Posts: 31
Joined: Mon May 07, 2018 4:07 pm

Broken Fan Duct

Postby claytony565 » Wed Jan 02, 2019 2:14 pm

Has anyone ever had the front fan duct on there Pro2 break? There is a part on the back that holds it onto the extruder that broke off. If anyone has had this happen, do you have the .stl file and would you mind sharing it?

Thanks.
Attachments
IMG_1376.JPG

Ari
Posts: 31
Joined: Fri Dec 23, 2016 3:18 pm

Re: Broken Fan Duct

Postby Ari » Wed Jan 02, 2019 4:24 pm

I do not have a Pro2 but I remember Vicky posting the attached STLs, could this be what you need?

Also check this link viewtopic.php?f=2&t=8&p=34452&hilit=shared#p34452

Ari
Attachments
Pro2 Fan Ducts.rar
(90.24 KiB) Downloaded 10 times

claytony565
Posts: 31
Joined: Mon May 07, 2018 4:07 pm

Re: Broken Fan Duct

Postby claytony565 » Wed Jan 02, 2019 6:20 pm

Ari wrote:I do not have a Pro2 but I remember Vicky posting the attached STLs, could this be what you need?

Also check this link viewtopic.php?f=2&t=8&p=34452&hilit=shared#p34452

Ari


Thank you, that was what I needed!


Return to “Pro2 Series”

Who is online

Users browsing this forum: No registered users and 1 guest