Page 1 of 1

Thumbnail - Octoprint, Mainsail

Posted: Tue Apr 13, 2021 7:44 pm
by Sunshine
I have been using ideamaker for a long while and recently upgraded my Ender 3 V2 to Klipper with Mainsail as the web interface to it. I would like to send a thumbnail to that interface and have it look like the same as in RaiseCloud. It works when I use PrusaSlicer but I would like to use Ideamaker instead for most of my prints.

Re: Thumbnail - Octoprint, Mainsail

Posted: Wed Apr 14, 2021 12:39 am
by Vicky@Raise3D
Are you looking for having gcode file to be formated to any specific way?

Re: Thumbnail - Octoprint, Mainsail

Posted: Wed Apr 14, 2021 12:37 pm
by Sunshine
Vicky@Raise3D wrote:Are you looking for having gcode file to be formated to any specific way?


I do not think so, does this link help? https://docs.mainsail.xyz/quicktips/thumbnails

Re: Thumbnail - Octoprint, Mainsail

Posted: Thu Apr 15, 2021 12:46 am
by Vicky@Raise3D
I will forward over to developing team to see whether we can achieve it in future versions.

Re: Thumbnail - Octoprint, Mainsail

Posted: Wed Sep 01, 2021 5:15 am
by schuema
@Vicky@raise3d: Are there some news about the thumbnail for mailsail?

Re: Thumbnail - Octoprint, Mainsail

Posted: Tue Sep 07, 2021 8:30 pm
by Vicky@Raise3D
The feature is still under developing. Haven't heard any update from the developing team yet.

Re: Thumbnail - Octoprint, Mainsail

Posted: Mon Oct 04, 2021 6:05 pm
by Vicky@Raise3D
From version 4.2.1, ideaMaker starts supporting octoprint and thumbnail for mainsail.
https://www.ideamaker.io/blogDetail.html?id=69
You can enable GCode Thumbnails option under Print Settings.
Image_20211004110505.jpg

Re: Thumbnail - Octoprint, Mainsail

Posted: Tue Oct 05, 2021 12:43 pm
by schuema
[quote="Vicky@Raise3D"]From version 4.2.1, ideaMaker starts supporting octoprint and thumbnail for mainsail.
https://www.ideamaker.io/blogDetail.html?id=69
You can enable GCode Thumbnails option under Print Settings.
....
@Vicky@Raise3D: I was happy about it, but in my case it doesn't work with mainsail. I tried a lot of resolutions (48x48, 30x30, 400x300) everything what was descripted in mainsail help, but I didn't get any Thumbnail. I use alwys the newest version of Klipper mainsail...

Bildschirmfoto_2021-10-05_14-41-24.png
Settings ideaMaker

Bildschirmfoto_2021-10-05_14-40-19.png
Version of my System
Bildschirmfoto_2021-10-05_14-40-19.png (15.64 KiB) Viewed 389 times


Best regards
Martin

Re: Thumbnail - Octoprint, Mainsail

Posted: Tue Oct 12, 2021 12:12 pm
by jahirpc
Hello, in advance I apologize for my terrible English. :x This feature has not been implemented in MoonRaker, that is why you cannot see the thumbnails in mainsail. Make a few changes and so far it's working fine.
If you are interested, I will gladly send the file with the changes made. The downside of this approach is that when it is updated again, the change must be made again. It is not a problem for me because the change really takes a maximum of 2 minutes.
[img]
vista%20previa.JPG
[/img]

Re: Thumbnail - Octoprint, Mainsail

Posted: Wed Oct 13, 2021 3:51 pm
by Vicky@Raise3D
Is there any limitation being added in Mainsail?
The same file can be printed out with no issue on Octoprint with Thumbnails.

Re: Thumbnail - Octoprint, Mainsail

Posted: Thu Oct 14, 2021 11:23 am
by th33xitus
Vicky@Raise3D wrote:Is there any limitation being added in Mainsail?
The same file can be printed out with no issue on Octoprint with Thumbnails.


Hi!

No there is no limitation in Mainsail.
The currently limiting factor is Moonraker, which is the API Mainsail is using to communicate with the Klipper firmware.
Moonraker parses the thumbnails from the uploaded g-code files. Those parsing option has to be added to Moonraker yet which will hopefully happen soon. :)

Thank you for adding support for it though!

- th33xitus
#team-mainsail

Re: Thumbnail - Octoprint, Mainsail

Posted: Fri Oct 15, 2021 5:05 pm
by Vicky@Raise3D
jahirpc wrote:Hello, in advance I apologize for my terrible English. :x This feature has not been implemented in MoonRaker, that is why you cannot see the thumbnails in mainsail. Make a few changes and so far it's working fine.
If you are interested, I will gladly send the file with the changes made. The downside of this approach is that when it is updated again, the change must be made again. It is not a problem for me because the change really takes a maximum of 2 minutes.
[img]
vista%20previa.JPG
[/img]


Would you mind share more information about the changes you mentioned? Is it something inside Gcode file or somewhere eles?

Re: Thumbnail - Octoprint, Mainsail

Posted: Tue Oct 19, 2021 5:59 pm
by th33xitus
Vicky@Raise3D wrote:Would you mind share more information about the changes you mentioned? Is it something inside Gcode file or somewhere eles?

He means, that he modified the Moonraker Code to be able to parse the thumbnails from the g-code.
At this point in time, Moonraker now officially supports parsing thumbnails from g-code generated by IdeaMaker.
So all issues should be resolved by now. :)

Although i must say, the viewing angle of the thumbnail is somehwhat...special?
Why did you not went with a simple isometric view?

Re: Thumbnail - Octoprint, Mainsail

Posted: Wed Oct 20, 2021 6:48 pm
by Vicky@Raise3D
It is currently using the same Front View as RaiseTouch instead of end view.