Dual filament printing - where are the instructions?

Please post your suggestions for software changes here
poldim
Posts: 9
Joined: Thu Aug 02, 2018 5:18 pm

Dual filament printing - where are the instructions?

Postby poldim » Sun Sep 15, 2019 4:20 pm

I'm trying to print a single object with a mix of materials from both print heads. I tried to look in the ideamaker manual but did not find anything mentioning dual extruder prints.

So, where is this documented?

User avatar
Vicky@Raise3D
Posts: 6916
Joined: Fri Mar 25, 2016 3:54 am

Re: Dual filament printing - where are the instructions?

Postby Vicky@Raise3D » Mon Sep 16, 2019 6:12 pm

You will need to devide the one object to be more than one to assign different objects to be printed by different nozzles to print.
Here is the informaton about using multiple extruders in ideaMaker.
https://support.raise3d.com/tree.html?cid=15&sid=463

User avatar
Jay_Omega
Posts: 20
Joined: Wed Dec 26, 2018 2:37 am

Re: Dual filament printing - where are the instructions?

Postby Jay_Omega » Wed Sep 18, 2019 12:44 am

If you have a single color model you want to separate into two parts, you can use Meshmixer to
separate the parts.

https://www.youtube.com/watch?v=8hnGD8AKlg4


Return to “Software”

Who is online

Users browsing this forum: No registered users and 1 guest