warning for low slicing temperature

Please post your suggestions for software changes here
bruce356
Posts: 1
Joined: Sat May 01, 2021 2:03 pm

warning for low slicing temperature

Postby bruce356 » Sat May 01, 2021 2:26 pm

I am sure others might agree, would like a way of "Turning Off" the "Temperature of extruder is low" popup Warning every time one slices.
Do not want ideamaker to enter temperatures at the start of the gcode as I use my own start script to do that.
The only way I have found to prevent this is to set the temperatures to zero "0", but then ideamaker bitches with a dialog box about temperature, this is very annoying and there should be an option to turn this warning OFF.
regards - bruce

User avatar
Vicky@Raise3D
Posts: 7915
Joined: Fri Mar 25, 2016 3:54 am

Re: warning for low slicing temperature

Postby Vicky@Raise3D » Tue May 04, 2021 3:21 am

You can disable Insert Heatup GCode Automatically in Start GCode under Gcode tab if you don't want to auto insert temperature code. No need modify the temperature to be 0.
https://support.raise3d.com/ideaMaker/5 ... 5-445.html


Return to “Software”

Who is online

Users browsing this forum: No registered users and 2 guests