Official Raise3D Community

You can adjust add extra Flowrate settings for certain height under Per-layer Settings.

The first layer thickness on Belt Printer is calculated according to Layer Height multiples Angle of Belt printer.
For 3, you can enable Place Seam on Belt Edge. https://support.raise3d.com/ideaMaker/5 ... 5-501.html

I have forwarded your requests over to the devloping team.
For the Number 2, the Start GCode currently under Filament Settings -> Custom GCode supports Pressure Advance GCodes.

Wouold you like to share your .idea, ,gcode and .data files of this slice with us?

Is there any specific feature listed below you are looking for ideaMaker to add?
To add custom start gcode under Printer Settings
To add Pressure advance under Filament Settings
Disable the spelling check for {} placeholder in start gcode, end gcode?

ideaMaker will update the default printer settings if the users are using the default value in software without modifying.

The issue should have been fixed. Please try again.

When there are Bottom Solid and Top Solid settings, the software will check the differences among the adjacent layers. If there are big differences, the software will add extra solid fils to improve the binding.

.idea file has saved settings under main template, Per-group and Per-layer settings. The reason why we didnt enable reload is to avoid the settings conflicts with the filament and printer information already existing in this computer. .idea file is able to share among different computers. We are wor...

RaiseCloud currently doesnt support camera rotation. I will forward your request over to developing team.
About the download issue, do you mean that the printer doesnt automatically starts printing after download completes? Would you like to share the error page with us?

As the settings in templates will be different among different filament so the current structure in ideaMaker is Printer -> Filament -> Template.

Would you like to share the .gcode and .data files with us?

Enable Overhang Fan Speed at Layer can be one little complicated settings. There are chances that during the whole print, Overhang Fan Speed may need to get enabled/disabled at different layers. It will be easier to process with Per-layer settings.

I have forwarded your issue to our developing team. We will get the issue fixed as soon as possible.

Have you tried Custom GCode under Filament Settings?
https://support.raise3d.com/ideaMaker/7 ... 5-468.html

Solid fill minimal width normally should be 2 times of extrusion width or more.
You can find dictionary on ideaMaker.io which have the comparison of the common settings among ideaMaker and other slicing softwares.
https://www.ideamaker.io/dictionary.html

We normally post our support related documents in our Support Center. https://support.raise3d.com/ You can also locate the link at the bottom of each page on RaiseCloud. Image_20220422235120.png RaiseCloud doesn't support Per-group/Per-layer Settings at the moment. However, you can still have ideaMa...

Group and Layer Settings will be saved in .idea, .bin and .data files. There's no specific spot on Cloud being assigned to save Per Group or Per Layer settings at the moment. Can you advise a little more details about under what situation you need Per Group and Per Layer setting on Cloud?

Please go to Right Extruder under Printer Settings and check whether Virtual Extruder Offset X is 42.5mm or other value.

We have already added support for Octoprint and Repetier. Support for Duet has already been added into developing list.