Search found 180 matches

by jetdillo
Tue Jun 05, 2018 3:06 pm
Forum: Printing Settings
Topic: wipe wall
Replies: 7
Views: 1344

Re: wipe wall

Do I want to be using a Wipe-Wall as well as a Wipe Tower for dual extrusion? I understand the purpose behind the Tower is to prime the nozzle during an extruder switch. Seems like maybe I should be using both ? Correct, you want wipe wall too. I would consider wipe tower "optional" and w...
by jetdillo
Tue Jun 05, 2018 1:25 pm
Forum: User's Gallery
Topic: Storage Box For V2 Hot Ends
Replies: 10
Views: 2049

Re: Storage Box For V2 Hot Ends

Neat idea and +1 for using OpenSCAD :)
by jetdillo
Tue Jun 05, 2018 1:23 pm
Forum: Printing Settings
Topic: wipe wall
Replies: 7
Views: 1344

Re: wipe wall

Do I want to be using a Wipe-Wall as well as a Wipe Tower for dual extrusion?
I understand the purpose behind the Tower is to prime the nozzle during an extruder switch.
Seems like maybe I should be using both ?
by jetdillo
Tue Jun 05, 2018 1:18 pm
Forum: Printing Settings
Topic: Successful ASA Settings
Replies: 5
Views: 1815

Re: Successful ASA Settings

Thanks for all of this.
I have an ASA project coming up.
Would you all say that "ASA Juice" is required as much as "ABS Juice" is for printing ABS ?
by jetdillo
Tue Jun 05, 2018 1:14 pm
Forum: Software
Topic: Updating Dropbear SSH To Fix Vulnerability
Replies: 7
Views: 896

Re: Updating Dropbear SSH To Fix Vulnerability

If you'd like to test, we can develop a beta version for you to work with Dropbear SSH. It would also be useful for backups to have rsync installed on a future firmware update as well. May I ask the reason why you need to use rsync? For backup the files from touchscreen? Yes. So I can backup my pri...
by jetdillo
Tue Jun 05, 2018 1:08 pm
Forum: Hardware
Topic: Lubricant?
Replies: 21
Views: 5759

Re: Lubricant?

Should we also be using the same lubricant(PTFE) on the Z-screws ?
by jetdillo
Tue Jun 05, 2018 8:36 am
Forum: Hardware
Topic: Bondtech Dual set-screw
Replies: 7
Views: 1402

Re: Bondtech Dual set-screw

"I don't want to cause any fear or alarm..." :) But I think I've got it :) Thanks Jetguy for the Amazon link. I ordered a pack of these : https://www.amazon.com/gp/product/B004K ... UTF8&psc=1 to replace the set-screw that had some how worked its way loose and refused to seat anymore. ...
by jetdillo
Tue Jun 05, 2018 7:31 am
Forum: Software
Topic: Updating Dropbear SSH To Fix Vulnerability
Replies: 7
Views: 896

Re: Updating Dropbear SSH To Fix Vulnerability

Vicky@Raise3D wrote:If you'd like to test, we can develop a beta version for you to work with Dropbear SSH.


It would also be useful for backups to have rsync installed on a future firmware update as well.
by jetdillo
Sun Jun 03, 2018 9:23 pm
Forum: Software
Topic: Print files backup
Replies: 7
Views: 720

Re: Print files backup

I've not peered too extensively under the "Front Panel" hood, except to notice that it runs Linux and I can ssh into it. A quick poke at the OS reveals: root@imx6qdlsolo:~# uname -a Linux imx6qdlsolo 3.10.53 #72 SMP PREEMPT Sun Sep 6 16:25:47 CST 2015 armv7l GNU/Linux root@imx6qdlsolo:~# c...
by jetdillo
Sun Jun 03, 2018 9:09 pm
Forum: Software
Topic: How do I change Tempurature Settings in Ideamaker?
Replies: 5
Views: 16204

Re: How do I change Tempurature Settings in Ideamaker?

For some boneheaded reason the filament/extruder temp setting are now in the tab labeled "Cooling". A BIG suggestion to Raise3D... learn about User-Centered Design! Yeah, I've never been able to figure out why this is called "Cooling" vs. "Temperature". I'm using 3.1.7...
by jetdillo
Sun Jun 03, 2018 9:04 pm
Forum: Hardware
Topic: Improvements by using TMC2130 driver.
Replies: 82
Views: 24219

Re: Improvements by using TMC2130 driver.

zemlin wrote:
jetdillo wrote:I'm looking at the Panucatt site right now.
Is the Digipot version of the SD2224 compatible with the N2+ or do I want the manual adjustment version ?

Manual.


Okay, ordered.
At $26 incl. shipping for two of them, like Jetguy said, how can you not ?
This will probably be next weekend's upgrade.
by jetdillo
Sat Jun 02, 2018 11:50 pm
Forum: Hardware
Topic: Improvements by using TMC2130 driver.
Replies: 82
Views: 24219

Re: Improvements by using TMC2130 driver.

I'm looking at the Panucatt site right now.
Is the Digipot version of the SD2224 compatible with the N2+ or do I want the manual adjustment version ?
by jetdillo
Tue May 29, 2018 10:19 pm
Forum: Hardware
Topic: Bondtech Dual set-screw
Replies: 7
Views: 1402

Re: Bondtech Dual set-screw

The shortest ones I found on Amazon are 2.5mm long https://www.amazon.com/Team-Losi-Set-screw-2-5mm/dp/B004KPJ84K I ordered these and they showed up in the mail over the weekend. They are, indeed, just a bit longer than the one I removed from my left-side extruder. Time to get out the Dremel and gr...
by jetdillo
Tue May 29, 2018 3:52 pm
Forum: Hardware
Topic: Copper Hot End?
Replies: 5
Views: 989

Re: Copper Hot End?

Running the virtually identical E3D setup at Jetguy. Very happy with the results, but I was upgrading chasing a part cooling issue and somewhat just because. The ability to fully sleeve it from the extruder gear down with Capricorn teflon tubing is another advantage and I want to start playing with...
by jetdillo
Tue May 29, 2018 3:50 pm
Forum: User's Gallery
Topic: Not very impressive but it worked
Replies: 2
Views: 848

Re: Not very impressive but it worked

PETG/PET+, when it works, is quite amazing. It looks like you have very little stringing/threading there.
I've managed to get my issues down to a minimum, but still seeing "spider silk" on the sides of some of my prints.
Would you mind sharing your settings for this part ?
by jetdillo
Mon May 28, 2018 10:53 pm
Forum: General
Topic: Poll - Do you use Ethernet, Wifi or Flash Drive to transfer your files to your Raise3D printer?
Replies: 46
Views: 6742

Re: Poll - Do you use Ethernet, Wifi or Flash Drive to transfer your files to your Raise3D printer?

I’m using the latest versions of touch and ideamaker on my N1. 1. The printer has Ethernet enabled. WiFi off. (But the Mac is connect via WiFi. So it’s not a direct Ethernet to Ethernet transfer). Same here. I've got the ethernet plugged into my local LAN here and then connect to the printer from m...
by jetdillo
Sun May 20, 2018 7:54 pm
Forum: General
Topic: Help identifying the cause of noise?
Replies: 6
Views: 1831

Re: Help identifying the cause of noise?

the XY Gantry is out of square, there are alignment blocks to help realign x and y axis. turn in a support ticket or pm me your e-mail and i will send you the instructions and stl file on how to realign. Hi, I am also experiencing this issue. Could you please send me a link to these alignment tools...
by jetdillo
Fri May 18, 2018 9:00 pm
Forum: Hardware
Topic: Bondtech Dual set-screw
Replies: 7
Views: 1402

Bondtech Dual set-screw

Does anybody know what size the set-screw for inner hobbed gear on the Bondtech Dual is ? I have been having a hell of a time trying to get it to seat correctly. Looks like I've got one of the ones that didn't come with LocTite on it and now I can't get it to stay tightened down. It looks like most ...
by jetdillo
Fri May 18, 2018 2:05 pm
Forum: General
Topic: MakerFaire Bay Area 2018
Replies: 1
Views: 607

MakerFaire Bay Area 2018

I couldn't make it out to MRRF earlier this spring, but I will be at MakerFaire in San Mateo, CA. this weekend. (5/18-5/20)
If you're a Raise3D user and are going to be there too, please chime in here. Maybe we can meet up !
by jetdillo
Fri May 18, 2018 1:59 pm
Forum: Printing Settings
Topic: Easy printing, high-temp material
Replies: 11
Views: 1623

Re: Easy printing, high-temp material

There are high temp PLAs (MakerGeeks Raptor), there are custom formulations of ABS that have low shrinkage and thus warping and layer stress. Material science is on your side, it just costs a little more. Example is ABS-X formulation made in the Netherlands https://shop.3dfilaprint.com/filaprint-ab...

Go to advanced search