Search found 3085 matches

by Jetguy
Sun Jun 28, 2020 2:29 am
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

the settings shown by RaiseTouch (re Esteps value) were stored somewhere (EEPROM?) and it would read those values and not use some defaults. Hopefully, R3D (Vickey) will bring this to the attention of their programmers. No, EEPROM is not used in this printer. We are actually mixing these up. First,...
by Jetguy
Sat Jun 27, 2020 8:55 pm
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

Just want to make it clear, I am in no way defending Raise or raisetouch updates here. Clearly, proof something has gone very badly. If one version works, then another doesn't, that's a problem. I am saying, user awareness, knowing what you own and how it works, what it needs to work, are all very i...
by Jetguy
Sat Jun 27, 2020 8:52 pm
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

What I'm trying to impress upon you as an owner, operator and maintainer/ troubleshooter of the machine is that again you have a non-standard "upgraded" printer that literally REQUIRES something, somehow, someway to change the default motion firmware steps per mm to the upgraded hardware s...
by Jetguy
Sat Jun 27, 2020 8:37 pm
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

Well, there it is, slapping us in the face. In your log file #2 the M92 set axis steps per mm contains the WRONG values. 2020-05-26T18:00:51.887 EDT| raisetouch| serial: echo: M92 X80.00 Y80.00 Z800.00 E94.00 AKA the default values for the original NON bondtech extruder. So what needs done and what ...
by Jetguy
Sat Jun 27, 2020 12:48 am
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

I know you may not consider it non standard, but it is. It doesn't work correctly without user intervention. In other words, if you replaced your screen box tomorrow and did nothing, your printer with a bondtech will under extrude by more than 4X. Again the software baseline, the firmware, everythin...
by Jetguy
Fri Jun 26, 2020 10:24 pm
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

And I could be wrong on all of this, it's some hardware bug or some weird raisetouch version bug I hadn't before seen. Just going on the info and experience and knowledge I have in front of me. I guess the obvious. Test Use the control panel, preheat the extruder and then command 10mm of filament an...
by Jetguy
Fri Jun 26, 2020 9:53 pm
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

Also, on the N series, this is why I keep harping, good to have that reprap discount full graphic LCD plugged into the motion board. We can perform a LOT more direct diagnostics like see what the motion board actually says is happening VS what the touchscreen sent. Like check actual step per mm, act...
by Jetguy
Fri Jun 26, 2020 9:49 pm
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

Again, in a nutshell. At the hardware and firmware level we have a few relationships. Steps per mm has to match the hardware so the hardware is commanded to go the correct distance. Going the correct distance is both important for distance and since speed is distance over time, if distance is wrong,...
by Jetguy
Fri Jun 26, 2020 9:39 pm
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

All about context. Yes, that line is an XY move and an extrusion line. It's important specifically on that line to know and see th previous couple of lines because it affects how that line is executed. On just face value, you are extruding 30mm of filament while moving to target position X20 at feed...
by Jetguy
Fri Jun 26, 2020 8:48 pm
Forum: N Series
Topic: Won't print
Replies: 23
Views: 667

Re: Won't print

What could change under a raistouch update? A KEY ONE- being steps per mm. In other words, one of the KEY things over time added was that instead of updating motion control firmware with hard coded values to match possibly upgraded hardware like oh say a Bondtech extruder that REQUIRED the user to e...
by Jetguy
Wed Jun 24, 2020 10:08 pm
Forum: Hardware
Topic: N2 Y Axis not working
Replies: 15
Views: 2533

Re: N2 Y Axis not working

pearson222 wrote:Here is a picture of the Panucatt SD2224 X/Y stepper drivers installed on the mainboard.
Image


Hence how I was betting you failed to configure the new motion board correctly.
by Jetguy
Wed Jun 24, 2020 10:05 pm
Forum: Hardware
Topic: N2 Y Axis not working
Replies: 15
Views: 2533

Re: N2 Y Axis not working

by Jetguy
Wed Jun 24, 2020 10:01 pm
Forum: Hardware
Topic: N2 Y Axis not working
Replies: 15
Views: 2533

Re: N2 Y Axis not working

My first thought is, hopefully you ALSO checked the microswitch settings under the stepper driver in the socket and ensured they were correct. Why? Because speed is closely related to microsteps. In other words, by default we are expecting a given number of microsteps. If the setting is less, the th...
by Jetguy
Wed Jun 24, 2020 8:55 pm
Forum: Hardware
Topic: N2 Y Axis not working
Replies: 15
Views: 2533

Re: N2 Y Axis not working

No, I would think not, the touschscreen simply sends gcode commands. If you see the distance increment on the screen, that indicates the command was sent. You could damage a mainboard socket by accidently inserting a driver in shifted pins and power on, and the right scenario, that could/would then ...
by Jetguy
Wed Jun 24, 2020 1:37 pm
Forum: General
Topic: Moving print area
Replies: 3
Views: 320

Re: Moving print area

And I'm just going to say it after reviewing that previous Pro2 topic thread https://forum.raise3d.com/viewtopic.php?f=18&t=16429&p=46904&hilit=n2+build+area#p46904 NO, you cannot move 10mm back on 300mm, aka 310mm. At BEST, you might get 5mm and that's touchy, more like 4.8mm as a safet...
by Jetguy
Wed Jun 24, 2020 1:28 pm
Forum: Software
Topic: pre print extruder run
Replies: 1
Views: 164

Re: pre print extruder run

It's a distance in the starting gcode, not a time. Learn to change it in your custom profiles you build for these custom nozzles. Greater E distance is more filament (good for larger nozzles) less distance than the default for smaller nozzles. Default total is 30mm Ensure the second line is always +...
by Jetguy
Wed Jun 24, 2020 1:19 pm
Forum: General
Topic: Moving print area
Replies: 3
Views: 320

Re: Moving print area

First, you are mistaken in the coordinate system Raise 3D Pro2 and N2 use a corner zero coordinate system. Front left corner, where the printer parks and homes is X0 Y0. Positive numbers climb as the nozzle moves back and right. You want to add 10mm not subtract So, assuming the printer had the phys...
by Jetguy
Sun Jun 21, 2020 3:14 pm
Forum: Software
Topic: problem after firmware update
Replies: 1
Views: 148

Re: problem after firmware update

Sorry to see another user struggle with touchscreen issues. I happen to know that Raise tech support has a software utility to completely re-write the EMCC storage module of the board back to a baseline. This does you no good because they don't share this in public, but it angers me over and over to...
by Jetguy
Fri Jun 19, 2020 6:06 pm
Forum: Hardware
Topic: N2 Y Axis not working
Replies: 15
Views: 2533

Re: N2 Y Axis not working

Something isn't adding up so here's what I can make out from what you posted. I checked the continuity between pins on the motor. Pins 1-2 and 3-4 show continuity, and there is no continuity between 1-4, 2-4, 1-3, 2-3. Sounds good to me and that is exactly what I would expect. I also checked continu...
by Jetguy
Wed Jun 17, 2020 11:56 am
Forum: General
Topic: Very Bobbly surface
Replies: 7
Views: 497

Re: Very Bobbly surface

Correct, an incorrect flowrate absolutely would cause that type of error. Again, what flowrate does is multiply the distance of the amounts of filament commanded in the gcode print file by the flowarate percentage. Higher than 100% = more filament, more plastic into the nozzle = more plastic out of ...

Go to advanced search