Search found 60 matches

by FreedomRules
Thu Jul 30, 2020 4:41 am
Forum: Hardware
Topic: Project: The next heated bed
Replies: 41
Views: 20167

Re: Project: The next heated bed

Sorry for really overdue response. I haven't been on the site for a long time. I'm sure you already found your answer but you should ground the shielding otherwise it doesn't dissipate out the rogue signals. Likely becomes a amplified for them if not grounded.
by FreedomRules
Mon Mar 09, 2020 1:51 pm
Forum: Hardware
Topic: Has anyone done a 32bit upgrade to the N2 series?
Replies: 25
Views: 6551

Re: Has anyone done a 32bit upgrade to the N2 series?

I have been looking at boards and also settled on the Duet 2 Wifi as looking like the best option. It will be a while before I can dig into that though, as I have some work around the house I better get done before I start taking a printer apart. My current plan is to use all stock hardware (I went...
by FreedomRules
Mon Mar 09, 2020 4:53 am
Forum: Hardware
Topic: Has anyone done a 32bit upgrade to the N2 series?
Replies: 25
Views: 6551

Re: Has anyone done a 32bit upgrade to the N2 series?

Couple more images.
by FreedomRules
Mon Mar 09, 2020 4:52 am
Forum: Hardware
Topic: Has anyone done a 32bit upgrade to the N2 series?
Replies: 25
Views: 6551

Re: Has anyone done a 32bit upgrade to the N2 series?

Wow! Sounds like an awesome upgrade! Please tell us the specifics of the upgrade. For example: This wiring guide will give you a breakdown of the wifi board and what it along supports. Personally if I were to do it again I'd go for the newer Duet3 board but the wifi or wired will do just as good. P...
by FreedomRules
Sun Mar 08, 2020 7:26 pm
Forum: N Series
Topic: Upgraded to a Duet 2 Controller
Replies: 11
Views: 4566

Re: Upgraded to a Duet 2 Controller

Any guide on how to change the controller?? I'm sorry but unfortunately no. I made several changes during the progression of this upgrade and I'm not really good at explaining things in a way most understand. If you have any direct question about the process I"m happy to answer. Just a warning...
by FreedomRules
Sun Mar 08, 2020 6:59 pm
Forum: Hardware
Topic: Has anyone done a 32bit upgrade to the N2 series?
Replies: 25
Views: 6551

Re: Has anyone done a 32bit upgrade to the N2 series?

I went with a Duet2WiFi board. Of course it takes patients to get everything done and up and running. In the end I'm glad I did it as it was way easier to utilize mods. My current mods are. E3D Head "REMOVED" Not as good a stock in my opinion Duet2 Board. Full rewire with insulated wiring ...
by FreedomRules
Sun Jan 12, 2020 7:49 pm
Forum: N Series
Topic: All Belt specs for replacement
Replies: 2
Views: 1136

Re: All Belt specs for replacement

Thank you for info. For some reason I was thinking the Z belt was a closed loop. Curious if you think the current belts are suffice or if a wider belt would reduce deflection.
by FreedomRules
Sun Jan 12, 2020 7:25 am
Forum: N Series
Topic: All Belt specs for replacement
Replies: 2
Views: 1136

All Belt specs for replacement

Does anyone know where I can find the specs for all the belts on the N2+. I'm sure i could message support to request buying replacement ones but I don't think I want OEM ones. I'm also thinking about migrating to a linear rail system anyway. I'd like to keep the same teeth count and pulley size I t...
by FreedomRules
Wed Jan 01, 2020 1:21 am
Forum: N Series
Topic: Upgraded to a Duet 2 Controller
Replies: 11
Views: 4566

Re: Upgraded to a Duet 2 Controller

After running the new board for several months I'm enjoying printing things again. Not a simple swap out by any means. With the new board, 10mm aluminum bed plate machined flat, upgraded 750w bed heater and a BLTouch sensor. I have to say printing things have never been more simple for me. I was alw...
by FreedomRules
Tue Aug 27, 2019 5:53 pm
Forum: Hardware
Topic: switchable / dimmable LED-Strips
Replies: 2
Views: 2551

Re: switchable / dimmable LED-Strips

Wouldn't take much with something like an adjustable DC-DC buck converter to allow adjustment via a pot. All a buck converter does is allow you to control the DC output voltage from what the input is down to zero volts. You can get them on Amazon one ebay pretty cheap. One could take it a step furth...
by FreedomRules
Tue Aug 27, 2019 4:17 pm
Forum: N Series
Topic: Upgraded to a Duet 2 Controller
Replies: 11
Views: 4566

Upgraded to a Duet 2 Controller

I finally got around to upgrading the controller on my Raise3D to a Duet 2 Wifi Controller with filament monitoring. I just got what I'd consider phase 1 completed yesterday. The new main board in and printing and it took a fair amount of new wiring. Actually with no calibrations done yet it printed...
by FreedomRules
Sun Aug 04, 2019 10:03 pm
Forum: Hardware
Topic: KevinOConnor/klipper Firmware
Replies: 2
Views: 1048

Re: KevinOConnor/klipper Firmware

It would appear your right. I guess instead of wasting my time trying to get it to work with Raise3D hardware. I'll just buy a Duet2 board and hook it up and then use it with the Klipper firmware. Basically your 3D printers board just handles the movements. All the calculations are done on another m...
by FreedomRules
Thu Aug 01, 2019 2:57 am
Forum: Hardware
Topic: KevinOConnor/klipper Firmware
Replies: 2
Views: 1048

KevinOConnor/klipper Firmware

Has anyone flashed this firmware onto a Raise3d printer? If so whats your thoughts...
by FreedomRules
Thu Aug 01, 2019 1:52 am
Forum: Hardware
Topic: Project: The next heated bed
Replies: 41
Views: 20167

Re: Project: The next heated bed

I went with a custom sized pad from. https://www.keenovo.com that matched my aluminum plate size. Then I purchased a schaffner FN9290-10-06 power module to replace the stock one. This then breaks out to a couple relay's that then power the whole printer plus the bed since it runs off 120V ac. I don'...
by FreedomRules
Mon Oct 01, 2018 4:24 am
Forum: Hardware
Topic: New Heated Bed Reads 738 degrees with no heat
Replies: 8
Views: 2684

Re: New Heated Bed Reads 738 degrees with no heat

I had got this working but the reported temperature was jumping alot with fluctuations of 20 degrees at most but averaged 5 degree bouncing. Even when it wasn't heating. Well after a a lot of different configurations I finally landed on one that worked. Which was building a RC Low-Pass filter inline...
by FreedomRules
Sun Sep 23, 2018 4:29 am
Forum: Hardware
Topic: New Heated Bed Reads 738 degrees with no heat
Replies: 8
Views: 2684

Re: New Heated Bed Reads 738 degrees with no heat

So when I get this hooked up is the temperature that is displayed suppose to be somewhat right or will the PID autotune fix that? I always thought PID autotune was more for how the bed heats and recovers not anything to do with what the temperature shows. It shows a temp of 295 with ABH Marlin 1.9. ...
by FreedomRules
Fri Sep 21, 2018 5:31 pm
Forum: Hardware
Topic: New Heated Bed Reads 738 degrees with no heat
Replies: 8
Views: 2684

Re: New Heated Bed Reads 738 degrees with no heat

Well I got a little farther last night. I cut out all the wiring I had done before and this time just did it all on a breadboard so I could rewire if necessary to find the right config. Currently my issue is that it shows 9 degree's vs 20 degree's like both my extruder's show as I'd think they'd sho...
by FreedomRules
Thu Sep 20, 2018 9:15 pm
Forum: Hardware
Topic: New Heated Bed Reads 738 degrees with no heat
Replies: 8
Views: 2684

Re: New Heated Bed Reads 738 degrees with no heat

Sweet I will try this tonight. Hopefully I have a 4.7 laying around.
by FreedomRules
Thu Sep 20, 2018 5:33 pm
Forum: Hardware
Topic: New Heated Bed Reads 738 degrees with no heat
Replies: 8
Views: 2684

New Heated Bed Reads 738 degrees with no heat

So I'm on the tail end of upgrading my bed like Socke did with a flat thick aluminum plate. I also upgraded the heater to a keenovo 120V 750 watt silicon heater. It comes with a 2 wire 100k B25°C/50°C=3950±1% thermistor. I then followed what I saw on a couple arduino posts and wired it up with a 10k...
by FreedomRules
Tue Sep 18, 2018 3:25 am
Forum: Hardware
Topic: Project: The next heated bed
Replies: 41
Views: 20167

Re: Project: The next heated bed

Wiring temp sensor. Did you add the 10k pull-up resistor and maintain 3 wire hookup or did you just do the 5v and ground and skip the sensor pin while still changing the setting in the Marlin firmware #define TEMP_SENSOR_BED 11? That or use completely different pins on the board? Only difference on ...

Go to advanced search