Search found 150 matches

by Raess
Thu Feb 22, 2018 10:21 pm
Forum: Others
Topic: Project robot lawnmower
Replies: 78
Views: 19438

Re: Project robot lawnmower

First part is printing. It still sticks to bed when added a brim. Only 27h more to be worried :-)
IMG_1937.jpg

IMG_1938.jpg
by Raess
Thu Feb 22, 2018 10:19 pm
Forum: Others
Topic: Project robot lawnmower
Replies: 78
Views: 19438

Re: Project robot lawnmower

DS2017. Yes first time using it. Its great. I normally use Inventor or SW. But I think i will stick with Fusion360.
by Raess
Thu Feb 22, 2018 2:10 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

Up and running again with a brim and bed at 95C. Looks good so far about 4h in to the print. I also redesign the sharp corners on the model to use a radius 10mm. I read this could release tensions from sharp edges. I am running PrimaSelect PETG. info found http://www.primafilaments.com/product/prima...
by Raess
Thu Feb 22, 2018 5:40 am
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

It ones again failed. It’s started to lift in one corner. What can be wrong this time? Should I print with brim?
9C2A2472-ADEC-47B9-8D38-85195FB9C8BB.jpeg

29626314-176D-4D1D-A3C3-ADE217EDA7B3.jpeg

47975E09-73A3-4328-AA9B-9D2283B2CF61.jpeg
by Raess
Wed Feb 21, 2018 8:01 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

Thanks for the tip :-) 85C on settings or actual temp on plate?
by Raess
Wed Feb 21, 2018 6:35 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

So I gave raft another chance. It look Good until the part lifted from the raft in one corner. The part is looking quite good with this settings and it’s rock solid. I must say that PTEG seems very strong 80FF9BD0-FA5C-4FCD-ADCF-BCAAA5ED60CA.jpeg So I redesign the part that I was trying to print and...
by Raess
Wed Feb 21, 2018 2:21 pm
Forum: General
Topic: Printer failure
Replies: 66
Views: 14257

Re: Printer failure

Great. Hope they send it worldwide. :)
by Raess
Wed Feb 21, 2018 8:37 am
Forum: General
Topic: Printer failure
Replies: 66
Views: 14257

Re: Printer failure

Nice to hear. Looking forward to see it in action ;)
by Raess
Wed Feb 21, 2018 5:07 am
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

Thanks! of course, I counted on heat loss. but a 30Cdifference is a qute big one. I assumed you compensated for heat lost during heat transfer when the printer is shipped with glass plate and Buildtak. Making it more correct then this. (I will try to heat up an Glass + buildtak to see the difference...
by Raess
Tue Feb 20, 2018 9:39 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

IMG_1885.jpg
by Raess
Tue Feb 20, 2018 9:35 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

I am now running on a PEI sheet. succeeded with a good print after tuning it once again. No strings, No Nozzle oozing. :-) IMG_1875.jpg Moving on to print a quite big part it ones again failed. I lifted from the bed in one corner. so I began to investigate. I was running this print at 80C but the te...
by Raess
Mon Feb 19, 2018 8:47 am
Forum: Others
Topic: Project robot lawnmower
Replies: 78
Views: 19438

Re: Project robot lawnmower

Thanks isabellamg. Ones I have tuned in the PETG filament. Printing of parts will begin. :)
by Raess
Sun Feb 18, 2018 1:35 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

This is so frustrating. The raft sticks very well. But offer a few layers the part lifted from the raft in one corner making the it a failed print. This filament seems quite hard to get right. So i am back to printing benchys. I have some oozing on the nozzle when printing the details in the inner s...
by Raess
Sat Feb 17, 2018 4:47 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

Yep no rafts. But I’m printing with raft now to see how it goes. Thanks ;-)
by Raess
Sat Feb 17, 2018 4:16 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

Thanks Julia. The part is printing fine now and stick very well on bed. Parts of the support structures does not stick to bed is now the problem.
by Raess
Sat Feb 17, 2018 12:14 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

Do anyone have feedback on this first layer?
70614544-E543-4FA1-88F3-E303AADE24FC.jpeg


Thanks
by Raess
Sat Feb 17, 2018 9:32 am
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

Thanks zemlin I will give PEI a try next week. Anyways all’s printing problems with PETG are now gone. But when I try to print a larger model with supports, the small parts of the supports want stick to the bed. The 3D bench sticks very well and first layers looks nice. My settings so far 220C 75C B...
by Raess
Fri Feb 16, 2018 5:08 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

@zemlin so If I want to swap to print different materials and not only PETG. It could be a problem? Anyways guys. I got so frustrated over the buildtak. I removed it and replaced it with a lokbuild in the meanwhile. And it sticks perfect!! 89B9CC75-0FD3-4F4F-8C95-FE28EEB2368C.jpeg BAE7DFFB-4916-4674...
by Raess
Fri Feb 16, 2018 6:52 am
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

@Squenz I like the stability. But If it works without I maybe give it a try. Don't the glass have a better Consistent Flatness rather then the aluminum? What type of clips are you using to stick the PEI directly on the aluminum? I actually bought 2 original glass plates more. One for The PEI and for...
by Raess
Thu Feb 15, 2018 2:11 pm
Forum: Printing Settings
Topic: PETG Settings
Replies: 64
Views: 14081

Re: PETG Settings

Thanks zemlin for the tips on the PEI :-) I will order a new glass build plate and a PEI. I finally got it to stick to the BuildTak. YEY! Ones again I cleaned and resurfacing it with sandpaper. rubbed it two times T-röd Kemetyl. I changes The Z-offset ones again to -0.18 (BLtouch) Settings for this ...

Go to advanced search