Search found 483 matches

by John@Raise3D
Sat Nov 05, 2016 3:10 pm
Forum: Hardware
Topic: temp limit of hot end
Replies: 1
Views: 1328

Re: temp limit of hot end

It is all metal hot end so it can stand quite high temperature. However, the heating rod and thermal couple may not. The suggested max temperature is 300 C.
by John@Raise3D
Sat Sep 24, 2016 1:55 pm
Forum: General
Topic: What is causing this problem?
Replies: 5
Views: 2197

Re: What is causing this problem?

I would suggest to use the 0.1mm layer height templates and add some support.
We will test it in the office on Monday as well.
by John@Raise3D
Fri Sep 23, 2016 7:08 pm
Forum: User's Gallery
Topic: Design based on Chinese paper yo-yo
Replies: 3
Views: 2553

Re: Design based on Chinese paper yo-yo

WOW! Nice print and a very clever design!
by John@Raise3D
Fri Sep 23, 2016 7:52 am
Forum: User's Gallery
Topic: PVA Support Material Test
Replies: 25
Views: 14025

PVA Support Material Test

We have finished more tests with PVA support. Here are some pictures and we will release a video on our YouTube channel. We have printed 3 models, including engineering parts and car model (Taco truck). Here is how it looks like when just out of printer. 1.JPG Remove support. 5.JPG Still some residu...
by John@Raise3D
Sun Sep 18, 2016 2:08 am
Forum: Hardware
Topic: X/Y home issue
Replies: 2
Views: 1469

Re: X/Y home issue

Hi,

Please check if the limit switch is properly trigger.
If the limit switch metal piece fell off already, most likely from your description, you will need 2 limit switches.
We will arrange replacement part to you asap.
by John@Raise3D
Thu Sep 15, 2016 2:35 pm
Forum: Feature Requests, Ideas, Wishes
Topic: Print fan shroud/ duct at 90 degrees for strength
Replies: 14
Views: 4968

Re: Print fan shroud/ duct at 90 degrees for strength

It is the same.
N1 and N2 (Plus) extruder head design is the same.
by John@Raise3D
Thu Sep 15, 2016 1:36 pm
Forum: Feature Requests, Ideas, Wishes
Topic: Printer review by Thomas Sanladerer
Replies: 12
Views: 9963

Re: Printer review by Thomas Sanladerer

Dear team of raise3d, I know that the 3d printing nerd has a N2+ printer and is doing some kind of "print reviews" of it, but I would prefer a full review by Thomas Sanladerer (https://www.youtube.com/user/ThomasSanladerer/featured). Actually I can't really understand why the 3d printing ...
by John@Raise3D
Thu Sep 15, 2016 1:17 pm
Forum: General
Topic: Printer control from Simplify3D
Replies: 3
Views: 1619

Re: Printer control from Simplify3D

You can connect a mouse (not the wireless type) to the screen and use mouse to control.
by John@Raise3D
Wed Sep 14, 2016 4:17 pm
Forum: General
Topic: Double extrusion, water-soluble support
Replies: 6
Views: 3934

Re: Double extrusion, water-soluble support

Thank you both for your answers. I did some tests but none where good. I'm trying to produce parts with supports inside the part, only removable if water-soluble, and for the moment, it doesn't work at all. The support is allways mixed with the material... If someone has a working gcode for me, i'm...
by John@Raise3D
Tue Sep 13, 2016 3:38 am
Forum: General
Topic: Double extrusion, water-soluble support
Replies: 6
Views: 3934

Re: Double extrusion, water-soluble support

We have tested PVA filament a lot. However, most examples are under NDA so that I can show them here. Since you ask about it, we start a new one with non-confidential models. It seems all good. water soluble support 4.jpg water soluble support 3.jpg water soluble support 2.jpg water soluble support ...
by John@Raise3D
Sun Sep 11, 2016 3:41 pm
Forum: Hardware
Topic: Z-axis noise / lined/grooved print
Replies: 19
Views: 5007

Re: Z-axis noise / lined/grooved print

That is another possible cause. Please keep us posted.
by John@Raise3D
Sun Sep 11, 2016 1:25 pm
Forum: Hardware
Topic: Z-axis noise / lined/grooved print
Replies: 19
Views: 5007

Re: Z-axis noise / lined/grooved print

yes, they are supposed to be loose. Then it may be the Z stepper driver. Turn off the printer first. Then take out the z stepper driver (middle one of the 5). Take out the E1 stepper driver (2nd counting from top) and put in the same way into z stepper driver slot. If you have a spare A4988, same pr...
by John@Raise3D
Sun Sep 11, 2016 9:01 am
Forum: Hardware
Topic: Z-axis noise / lined/grooved print
Replies: 19
Views: 5007

Re: Z-axis noise / lined/grooved print

ball screw.png

Have you tightened those screws?
by John@Raise3D
Sat Sep 10, 2016 6:40 am
Forum: General
Topic: Feeder Makes Clicking Noise
Replies: 2
Views: 1235

Re: Feeder Makes Clicking Noise

If you hear the clicking sound, that means the feeding gear can't feed the filament through any more.
Which layer did it happen? What material and at what temperature? Fan working fine? Please share pictures of the fail.
by John@Raise3D
Sat Sep 10, 2016 6:25 am
Forum: Hardware
Topic: Changing build bed home?
Replies: 2
Views: 1534

Re: Changing build bed home?

• Leveling/Nozzle Distance: For N2/N2Plus the print bed is pre-leveled, so leveling is not necessary for initial setup. The distance between the nozzle and the platform could be adjusted by turning the thumb screw on the left-front corner of the Z plate. The higher the screw stands out, the further ...
by John@Raise3D
Sat Sep 10, 2016 6:22 am
Forum: Hardware
Topic: Suggestions on what causes this issue.
Replies: 10
Views: 2630

Re: Suggestions on what causes this issue.

support@raise3d.com
For any question you have, that is where you can email.
by John@Raise3D
Sun Aug 28, 2016 10:31 pm
Forum: Hardware
Topic: whats required to print 3mm filament
Replies: 2
Views: 2319

Re: whats required to print 3mm filament

swampy wrote:so why in ideal maker are their filament profile settings for 3mm


That is for our F-series printers. We still have a lot of active users out there.
by John@Raise3D
Sun Aug 28, 2016 10:29 pm
Forum: Hardware
Topic: The fans don't start
Replies: 6
Views: 2318

Re: The fans don't start

Hello. I have an N2 plus dual, and the fans don't start their self. I have to give it a push, then the left one start. What can be wrong? From reading on internet it seems it should run constant. There is nothing blocking it, and it turns light. The right one does not start. Is it suppose to run, w...
by John@Raise3D
Mon Aug 22, 2016 11:09 pm
Forum: Hardware
Topic: Guidance from Raise3D re: V2H nozzles
Replies: 2
Views: 1145

Re: Guidance from Raise3D re: V2H nozzles

NinjiaFlex needs slow printing speed hence for 0.8mm it may need much slower. We will do some tests on it and see how it turns out.
In terms of nozzles, they are coated brass nozzles.

Go to advanced search