Search found 225 matches

by Michael.P@Raise3D
Wed Dec 27, 2017 5:20 pm
Forum: Software
Topic: Something missing after slicing!
Replies: 5
Views: 1239

Re: Something missing after slicing!

I would be inclined to agree with zemlin on this one. We have printed the Eiffel tower before and it was full bed volume (larger than your current setup) and the posts were quite small even then.
by Michael.P@Raise3D
Fri Dec 22, 2017 9:21 pm
Forum: Printing Settings
Topic: Correct print settings for colorFabb nGen
Replies: 2
Views: 1206

Re: Correct print settings for colorFabb nGen

Hi Allan Sche Sar,

You may want to try a different orientation on the model, the print is more prone to breakage when standing up like it is. The part broke on the seam line, so increasing temp may help as well.
by Michael.P@Raise3D
Fri Dec 22, 2017 7:10 pm
Forum: Hardware
Topic: Printer Filament Monitor
Replies: 76
Views: 21504

Re: Printer Filament Monitor

An update to what Vicky previously mentioned, we are preparing for our Pre-order phase of the Filament detection system. We should have some more solid info for you guys by the end of this year. We want to be able to provide the correct info all at once rather then piece it out over time now.
by Michael.P@Raise3D
Fri Dec 22, 2017 7:00 pm
Forum: Feature Requests, Ideas, Wishes
Topic: Feature Request adjust print speed per defined layer(s)
Replies: 11
Views: 3672

Re: Feature Request adjust print speed per defined layer(s)

Thank you Casale8, we are trying to respond to anything and everything. The more input we get from our community the better we can make our products. We look forward to what the future holds for both our community and the company, have a great holiday and new years!
by Michael.P@Raise3D
Fri Dec 22, 2017 6:56 pm
Forum: User's Gallery
Topic: Raise3d Clock
Replies: 2
Views: 1866

Re: Raise3d Clock

Yeah... we have to make this.. Oh, im sorry, we already are! Great design, we look forward to hanging this one on our wall.
by Michael.P@Raise3D
Fri Dec 22, 2017 6:47 pm
Forum: General
Topic: ABS Printing
Replies: 23
Views: 6189

Re: ABS Printing

For starters, make sure you have the top cover on, all doors shut and fan covers on the print head. Set the bed height to be around 200µ when printing on Buildtak and a little closer when on Glass. Bed temp can be either 100-110 and nozzle a minimum of 240c. After this you will need to adjust as nee...
by Michael.P@Raise3D
Thu Dec 21, 2017 9:49 pm
Forum: General
Topic: Air Prints
Replies: 21
Views: 4807

Re: Air Prints

When running the "Extrude" command, can you pull up on the filament gently and get it to bypass the feed motion?
by Michael.P@Raise3D
Thu Dec 21, 2017 1:13 am
Forum: General
Topic: Warping Issues
Replies: 10
Views: 2627

Re: Warping Issues

@jacobcatchen,

you need to change the profile in ideaMaker to ABS when you go to slice the model.
by Michael.P@Raise3D
Wed Dec 20, 2017 11:49 pm
Forum: Others
Topic: Must do upgrades to N2
Replies: 6
Views: 2880

Re: Must do upgrades to N2

Hi dawyer47, To be honest, even on my machine I have not really modded it like my old printers. For the most part I have a few extra glass plates with different surfaces on them for other material types. If you are going to install Bondtech we suggest you watch their video very carefully and ask the...
by Michael.P@Raise3D
Wed Dec 20, 2017 10:14 pm
Forum: General
Topic: Warping Issues
Replies: 10
Views: 2627

Re: Warping Issues

Glue on Buildtak is a dirty method to get stick down but it is proven to work when applied!
by Michael.P@Raise3D
Wed Dec 20, 2017 8:42 pm
Forum: General
Topic: Warping Issues
Replies: 10
Views: 2627

Re: Warping Issues

Fan Covers on and top cover on and bring the bed temp up to 100c at least. Close all doors as well to keep the excess heat in the chamber. The method of printing ABS and PLA are almost opposite to each other.
by Michael.P@Raise3D
Wed Dec 20, 2017 8:08 pm
Forum: General
Topic: New owner: First impressions
Replies: 5
Views: 1876

Re: New owner: First impressions

Hi Shane,

Thank you for your review of the printer, we are enthused to hear that you are so happy with the printer. We look forward to seeing what parts you are able to produce in January if you can post them.

-Michael
by Michael.P@Raise3D
Wed Dec 20, 2017 7:21 pm
Forum: General
Topic: Warping Issues
Replies: 10
Views: 2627

Re: Warping Issues

Hi jacobcatchen, My recommendation is to set your bed plate to 60c and adjust your nozzle height with the .2mm shim included in the accessories kit. Remember to have the top cover off while printing with PLA otherwise the chamber will heat up too much and cause the filament to grind out on longer pr...
by Michael.P@Raise3D
Wed Dec 20, 2017 7:10 pm
Forum: Feature Requests, Ideas, Wishes
Topic: Feature Request adjust print speed per defined layer(s)
Replies: 11
Views: 3672

Re: Feature Request adjust print speed per defined layer(s)

Hi Casale8, I believe we already have this function in the new beta version of ideaMaker, when you go to select template you will find a few more tabs. In these tabs you will find a "Group and Layer Settings" then "Per Layer Settings". From here you should be able to set a Z-Heig...
by Michael.P@Raise3D
Tue Dec 19, 2017 11:11 pm
Forum: Hardware
Topic: offset y layer consistent & repeatable
Replies: 10
Views: 2442

Re: offset y layer consistent & repeatable

Sounds good, toss me a file at me email michael.p@raise3d.com
by Michael.P@Raise3D
Tue Dec 19, 2017 10:05 pm
Forum: Hardware
Topic: offset y layer consistent & repeatable
Replies: 10
Views: 2442

Re: offset y layer consistent & repeatable

All good Stewart, lets keep the good prints rolling. If you find anything else along those lines that can shed some more light on the issue from before please update us.
by Michael.P@Raise3D
Tue Dec 19, 2017 10:03 pm
Forum: Software
Topic: IdeaMaker: contents of the data file?
Replies: 20
Views: 7510

Re: IdeaMaker: contents of the data file?

Hi Stewart,

I do not believe in our current setup we can have the touch screen display embedded pictures in the G-Code, this is why we use the .data file that gets exported from iM. To my knowledge, we have not had anyone embed an image into the G-code and get it to run on the touchscreen.
by Michael.P@Raise3D
Tue Dec 19, 2017 9:46 pm
Forum: Printing Settings
Topic: Trouble with overhang printing
Replies: 10
Views: 2986

Re: Trouble with overhang printing

Hi DS2017,

Normally ideaMaker should run the overhangs just fine, my question would be what material are you using and what is the temp of the nozzle when printing?

Go to advanced search