Search found 184 matches

by Vagulus
Tue Mar 31, 2020 12:50 am
Forum: General
Topic: How thick can a layer be?
Replies: 9
Views: 1463

Re: How thick can a layer be?

That sounds great. Please don't go out of your way with a test print. Check this out. https://www.nzherald.co.nz/nz/news/article.cfm?c_id=1&objectid=12320501 You might like to get something going where you are if it helps. Code at https://www.prusa3d.com/covid19/ Thanks for your help. Stay well ;)
by Vagulus
Mon Mar 30, 2020 5:02 am
Forum: General
Topic: How thick can a layer be?
Replies: 9
Views: 1463

Re: How thick can a layer be?

I'm just prototyping in PLA but the recommended material for these is PETG :)

Thanks for the assessment on 0.6 mm nozzles.
by Vagulus
Mon Mar 30, 2020 12:14 am
Forum: General
Topic: How thick can a layer be?
Replies: 9
Views: 1463

Re: How thick can a layer be?

I'm using 0.4 mm nozzles and 0.3 mm layer so I am over your suggested limit but there is no apparent problem with this item. I don't think I can realistically go up to even a 0.6 nozzle because of the width of the model (approx 2 mm).

What do you think?
by Vagulus
Sun Mar 29, 2020 9:52 pm
Forum: General
Topic: How thick can a layer be?
Replies: 9
Views: 1463

How thick can a layer be?

I have a Pro2 using 0.4 mm nozzles and a project where (as usual) production speed is very important. Obviously, the fewer laps of the layer required to build a given height the more items can be produced in a given time. This raises the question, "How thick can a layer be?" As ever wary o...
by Vagulus
Sat Mar 28, 2020 2:50 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Hi Vicky

I can't figure any way to get my print head to 'fast transit' about the place like that so I can check.
Can you send me some gCode which will race the print head around the perimeter of the print platform a couple of times.
Then I could have a look.

Thanks

PS - Stay well ;)
by Vagulus
Fri Mar 27, 2020 3:33 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Sorry about taking so long to get back. Things have been a bit chaotic round here :roll: We were thinking all the issues on the prints were because of improper slicing settings. So we were trying to adjust different settings for you and see whether the result is improving or not. Uh, huh! That is wh...
by Vagulus
Wed Mar 11, 2020 1:55 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

I think these photos show that we haven't fully resolved the problem.
https://1drv.ms/u/s!ArMxdUYEh9fKkA7MnokyN_kwd6n0?e=PdxndY

Even now, I don't know what you are trying so I can't do more than send the images.

Looking forward to your response. :geek:
by Vagulus
Tue Mar 10, 2020 1:17 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Got those files. Vicky, thanks.
Printer hard at work at the moment - I'll try these tomorrow.

BTW: You refer to 'the settings we select for your eSun PLA+'. That last set of results was printed using the settings I selected (I sent you a link a couple of posts back).
by Vagulus
Mon Mar 09, 2020 10:48 pm
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

My bad. :( I said the left side medallion was printed on the platform. It was not. It was printed on a 2-1-2 Raft. What 'red and white leftovers'? Anything you see on the black background is just detritus on the (black) board I use as a worktop. Nothing to do with the models. I print on BuildTak. It...
by Vagulus
Mon Mar 09, 2020 3:13 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

After some trial and error I came up with a set of settings for my Pro2 which give me this: 200309-OnPLatform left - OnSupport right-640x478.jpg On the left is the underside of a medallion printed on the platform, on the right the medallion was printed on support. I am happy enough with the platform...
by Vagulus
Sat Mar 07, 2020 2:45 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Thanks Vicky - I'll have a play and get back to you.
by Vagulus
Fri Mar 06, 2020 5:59 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Hi Vicky Please, I do wish you would not simply ignore my questions. I am trying to learn as we go along and I can learn nothing if you don't tell me what is going on. :) Your last gCode had a few starting issues 200306-StartOfPrint-640x478.jpg and a few finishing issues 200306-FinishedPrint-478x640...
by Vagulus
Fri Mar 06, 2020 1:19 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Got'em. I'll be back
by Vagulus
Thu Mar 05, 2020 8:16 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

This is what was produced 200305-Vicky'sMedallion-478x640.jpg There is better detail in the attached large image. You can see that there was a little problem with the first few layers of the Wipe Wall. Otherwise all good. We sliced it with default templates, ... What do you mean by 'default template...
by Vagulus
Thu Mar 05, 2020 5:38 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Thanks Vicky.
I'll give that a burl and get back to you.
by Vagulus
Tue Mar 03, 2020 8:43 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

I ran your code, Vicky, and while it was running I noticed a few things. 1) Printing the Raft you use two first layers - for ages I have only used one. 2) The 2-1-2 Raft gave a better surface that I usually achieved. 3) You set the Printing Platform Temperature to 60C - I usually use 30C because eSu...
by Vagulus
Mon Mar 02, 2020 10:48 pm
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Got the files this time, thanks Vicky.
Perhaps we will get a better idea of whether your alterations have been successful if you re-cut the code for this
Medallion Reverse-478x640.jpg
Medallion Reverse-478x640.jpg (40.5 KiB) Viewed 3707 times

which is the Raise Giveaway Spinner (my cut).

I have attached my code if you would like to give that a try.
Thanks
by Vagulus
Sun Mar 01, 2020 7:19 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Vicky@Raise3D wrote:We tried to slice your file for you. Please check the download link:
https://we.tl/t-Je1wDmKo1g


Sorry, I've been away a few days. By the time I got back the file was no longer available.
Please try again. I'll try not to miss it this time.

Thanks
by Vagulus
Fri Feb 21, 2020 2:54 am
Forum: General
Topic: Delamination problem
Replies: 54
Views: 10337

Re: Delamination problem

Vicky@Raise3D wrote:
Vagulus wrote:Would you like to share your gcode with us of this print?


Herewith download https://1drv.ms/u/s!AvZ9amwal2YXj4kHl5AIG8UL-XoK8A?e=QUF7Aq

Go to advanced search