Search found 394 matches

by Trhuster
Sat Sep 24, 2016 6:31 pm
Forum: User's Gallery
Topic: 3D Prima Select PLA Tested
Replies: 25
Views: 17482

Re: 3D Prima Select PLA Tested

Tested some 3Dprima Bronze with 80% bronze powder in it. I used a small bronze brush to get some shine, worked out pretty well i think. It nice and heavy too. :) Settings i used was 205c/30mm/s and 0.15 layers.

Image
by Trhuster
Fri Sep 23, 2016 1:29 pm
Forum: User's Gallery
Topic: PVA Support Material Test
Replies: 25
Views: 16014

Re: PVA Support Material Test

Support looks very strange, like a fuzzy hariball ;). How can it hold up anything? I have some PVA from 3DPrima to try out soon, will report back about my findings.
by Trhuster
Fri Aug 26, 2016 11:48 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

Trhuster - Do you know offhand whether these nozzles would work on MB style hotends like our CloneR1? I could see using bigger nozzles on the Raise3D but for me if I was going to print something with a really small nozzle I would probably want to use a different printer. They should work with Clone...
by Trhuster
Tue Aug 23, 2016 9:01 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

Vicky@Raise3D wrote:Thanks so much as always, Trhuster. For keeping on sharing so many useful information and tests here. :)


I am damaged, i just like test stuff because off my own curiosity. :P
by Trhuster
Tue Aug 23, 2016 4:49 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

I am sorry noot to include a link to where to find those exact nozzles. I will add it to the first post now. Link: http://3dsolex.com/matchless I find that page quite confusing, it sounds like you just purchased nozzles but the page sounds like you have to purchase their heater block. There are 14 ...
by Trhuster
Mon Aug 22, 2016 4:48 pm
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

I am sorry noot to include a link to where to find those exact nozzles. I will add it to the first post now.

Link: http://3dsolex.com/matchless
by Trhuster
Mon Aug 22, 2016 6:35 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

Wow those large nozzle prints turned our pretty nice. Theoretically they are stronger prints. Can you tell me about print speeds? I would figure the larger the diameter the faster the print. Any comparison times? Thanks a ton for doing these tests. Ofcourse it goes faster with bigger layers. How mu...
by Trhuster
Mon Aug 22, 2016 6:31 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

Yes they are plug and play. You have to adjust your bed for the first layer abit though.
by Trhuster
Sun Aug 21, 2016 5:04 pm
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

What happens to the speed if you set the extrusion width to the same as the nozzle? I have not tested that yet. Wich nozzle size would you like me to test it with? either the 0.8 or 1.0mm, with extrusion width set the same as nozzle diameter. Test with 1.0mm nozzle and 0.6mm layer height, 260c hote...
by Trhuster
Sun Aug 21, 2016 2:26 pm
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

Another tiny print with 0.25mm nozzle. Overhangs again abit rough, i really need a better part cooling fan. But consider how tiny this print is i would say it is ok.

Image
by Trhuster
Sun Aug 21, 2016 12:33 pm
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

Just a quick test with 0.25mm nozzle and 0.1mm layers, speed 60mm/s. Using 3dprima Select PLA. Print is tiny and not really good but i can see the potential here, upper part off the bird looks kind off nice. https://pinshape.com/items/23778-3d-printed-bird-cages http://i.imgur.com/g0lli4u.jpg
by Trhuster
Sun Aug 21, 2016 10:44 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

What happens to the speed if you set the extrusion width to the same as the nozzle? I have not tested that yet. Wich nozzle size would you like me to test it with? either the 0.8 or 1.0mm, with extrusion width set the same as nozzle diameter. Ok i will test with 1.0mm nozzle with extrusion width se...
by Trhuster
Sun Aug 21, 2016 10:18 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

RogerSt wrote:What kind of build plate do you use?


Using Printbite, it works but not i don't really like it. Just to lazy to try out anu other surface atm.

http://mutley3d.com/Buy-PrintBite/
by Trhuster
Sun Aug 21, 2016 10:14 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

Re: 3dSolex Large Diameter Nozzles Tested

Michael wrote:What happens to the speed if you set the extrusion width to the same as the nozzle?


I have not tested that yet. Wich nozzle size would you like me to test it with?
by Trhuster
Sun Aug 21, 2016 8:18 am
Forum: Hardware
Topic: 3dSolex Large Diameter Nozzles Tested
Replies: 39
Views: 18144

3dSolex Large Diameter Nozzles Tested

So this is my first time ever i try out any nozzle than standard 0.4. I have a set off 3dSolex nozzles, sizes i have is 0.1, 0.25, 0.4, 0.6, 1.0, 1.5, 2.0. http://3dsolex.com/matchless http://i.imgur.com/hxSsCNd.jpg Main point with this nozzles is that they have a new internal core heating system. S...
by Trhuster
Thu Aug 18, 2016 4:14 pm
Forum: User's Gallery
Topic: MakerGeek's Raptor High Temp PLA projects
Replies: 14
Views: 8457

Re: MakerGeek's Raptor High Temp PLA projects

Pretty cool stuff here!
by Trhuster
Mon Aug 15, 2016 5:47 pm
Forum: Hardware
Topic: ED3 Volcano Compatibility? Settings?
Replies: 15
Views: 5442

Re: ED3 Volcano Compatibility? Settings?

I will start another thread with more info this weekend if i am up too it. But this is my first few minutes with ABS at 260c and 0.6 nozzle and layer height 0.45mm. Speed in Simplify3d is 60mm/s, outline 50%.

https://youtu.be/ehmQ_lKkmu8
by Trhuster
Mon Aug 15, 2016 4:38 pm
Forum: Hardware
Topic: N1 vs N2
Replies: 3
Views: 2073

Re: N1 vs N2

Same quality or mabey even slightly better on N1. That is beacause off shorter X/Y rods. I normally don't print below 0.1 layers and if it is any z-ringing to speak off it is very faint.
by Trhuster
Mon Aug 15, 2016 2:30 pm
Forum: Hardware
Topic: ED3 Volcano Compatibility? Settings?
Replies: 15
Views: 5442

Re: ED3 Volcano Compatibility? Settings?

Might want to replace the extruder drive while your at it, the faster you move plastic the harder the extruder drive has to work. The stock drive can be made to work at normal extrusion rates but you might run in to issues at a higher flow, even with a Volcano. Not to plug the Bondtech too much but...

Go to advanced search