Search found 60 matches

by wo4sunhao
Mon Jul 15, 2019 3:30 pm
Forum: Printing Settings
Topic: Layer Separation
Replies: 8
Views: 321

Re: Layer Separation

Did anyone have this layer separation problem before? I have bought this printer for 2 years and this is the first time ever have this problem. I look up online and did not find any similar issue like this. Most other layer separation problem is caused by cooling and you can see warp on separated l...
by wo4sunhao
Mon Jul 15, 2019 3:29 pm
Forum: Printing Settings
Topic: Layer Separation
Replies: 8
Views: 321

Re: Layer Separation

Vicky@Raise3D wrote:Looks like the extrusion is not continuously good. What was the temperature you set for this filament? Did you see nozzle temperature changes a lot during printing?

I don't have a temperature monitor. Is there a way to monitor the temperature while its printing??
by wo4sunhao
Tue Jul 09, 2019 7:51 pm
Forum: Printing Settings
Topic: Layer Separation
Replies: 8
Views: 321

Re: Layer Separation

Vicky@Raise3D wrote:Do you only have this issue with one type of filament or all types of filament?

I am only printing PLA right now. I am not sure if this will happen on other materials.
by wo4sunhao
Tue Jul 09, 2019 3:46 pm
Forum: General
Topic: Layer Problem Please Check Pictures for More Detail
Replies: 4
Views: 260

Re: Layer Problem Please Check Pictures for More Detail

detroitus wrote:It's going to be difficult for anyone to give you advice on this if you don't include details like the material you're using, the temperature and speed settings, whether you are using layer cooling, nozzle size, etc...

So do you have the similar issue before?
by wo4sunhao
Tue Jul 09, 2019 3:46 pm
Forum: Printing Settings
Topic: Layer Separation
Replies: 8
Views: 321

Layer Separation

Did anyone have this layer separation problem before? I have bought this printer for 2 years and this is the first time ever have this problem. I look up online and did not find any similar issue like this. Most other layer separation problem is caused by cooling and you can see warp on separated la...
by wo4sunhao
Mon Jul 08, 2019 9:54 pm
Forum: General
Topic: Layer Problem Please Check Pictures for More Detail
Replies: 4
Views: 260

Re: Layer Problem Please Check Pictures for More Detail

P.S. Here is no warp between separate layer and good layer. It just look like the bad layer is not printed on the pervious layer but on air.
by wo4sunhao
Mon Jul 08, 2019 9:51 pm
Forum: General
Topic: Layer Problem Please Check Pictures for More Detail
Replies: 4
Views: 260

Layer Problem Please Check Pictures for More Detail

Basically the layer is separated in some level height. I am not sure if the layer does not stick to each other or the printer does not print on the right spot. I have bought this printer for 2 years and this problem is the first time happen and continue happen randomly. Here is the description if yo...
by wo4sunhao
Mon Jan 07, 2019 6:41 pm
Forum: General
Topic: N1 Layer Shifting
Replies: 12
Views: 2640

Re: N1 Layer Shifting

dsiegfried wrote:I opened a ticket.

Hi I wonder if they solve your problem in the ticket because I get shift problem also. And, I can not find the reason why it happens after check everything.
by wo4sunhao
Fri Jan 04, 2019 4:19 pm
Forum: Printing Settings
Topic: Hot to Improve Support Area Print Quality
Replies: 3
Views: 402

Re: Hot to Improve Support Area Print Quality

So there's a few different ways. The support density will decrease the space between the wavy lines on the x-y plane, but not increase the thickness of them. Printing with a bigger nozzle will increase the support thickness. You really don't want thick support though as that does give better adhesi...
by wo4sunhao
Thu Jan 03, 2019 5:16 pm
Forum: Printing Settings
Topic: Hot to Improve Support Area Print Quality
Replies: 3
Views: 402

Hot to Improve Support Area Print Quality

To specify, I mean the area of the part that is hundred percent supported by support structure. These areas of my print are always like messy lines. I tried to increase the support structure ration to 30% but it does not really help. I wonder how you guys solve this kind problem?
by wo4sunhao
Fri Nov 02, 2018 5:59 pm
Forum: Printing Settings
Topic: Turn up Printing Speed
Replies: 6
Views: 787

Re: Turn up Printing Speed

Vicky@Raise3D wrote:It is hard to keep the same quality with higher printing speed, or you may can only do slightly change, like 5-10% based on the default ones. Or you need to tuning the speed, temperature and cooling together to reach to a new balanced value.

I see
by wo4sunhao
Thu Oct 25, 2018 10:45 pm
Forum: Printing Settings
Topic: Turn up Printing Speed
Replies: 6
Views: 787

Re: Turn up Printing Speed

If you don't have very high requirements to print surface, increasing layer height is an easiest way to reduce print time. Such as switching speed profile from high quality profile, the print time will have a lot difference. I need to print faster at 0.1mm layer height and keep same or almost same ...
by wo4sunhao
Thu Oct 25, 2018 10:44 pm
Forum: Printing Settings
Topic: Turn up Printing Speed
Replies: 6
Views: 787

Re: Turn up Printing Speed

crimsonyoshi wrote:Print speed heavily depends on the material you're using. Are you asking about print speed for PLA, or something else like ABS, Polycarbonate, etc.?

Asking for PLA
by wo4sunhao
Wed Oct 24, 2018 9:03 pm
Forum: Printing Settings
Topic: Turn up Printing Speed
Replies: 6
Views: 787

Turn up Printing Speed

I have used N2 plus for a certain time and can constantly print good quality part. Then, I want to speed it up to make the printing process more efficient without lowering the print quality. So, I want to check with you guys. What default print speed do you guys use? Which speed setting should start...
by wo4sunhao
Wed Oct 17, 2018 3:26 pm
Forum: Pro2 Series
Topic: Pro2 Plus Question
Replies: 9
Views: 741

Re: Pro2 Plus Question

Rogman wrote:Do you mean the glass from the N2 series? if so, then yes. The glass i have on the one in the picture is one of a few back up plates i have for my N2+, sourced from a local glass company but cut to fit the N2+.

Thank you man, this help me a lot.
by wo4sunhao
Tue Oct 16, 2018 8:35 pm
Forum: Pro2 Series
Topic: Pro2 Plus Question
Replies: 9
Views: 741

Re: Pro2 Plus Question

yes, but not on top of the BuildTak. i normally do not use BuildTak and remove it. i have 2 build plates for easy swapping at busy times. The printer is in use so i was taking a picture of my 2nd plate. so easy answer is, you would need to remove the BuildTak from original plate or order a second b...
by wo4sunhao
Tue Oct 16, 2018 5:41 pm
Forum: Pro2 Series
Topic: Pro2 Plus Question
Replies: 9
Views: 741

Re: Pro2 Plus Question

Without the silicone the glass would slide around, so not without clipping the glass to the bed somehow. here is a picture of my set-up. i washed off the elmers purple glue stick. https://i.imgur.com/RX36sCD.jpg So instead of taking their bed off and put the glass bed on, you put the glass directly...
by wo4sunhao
Tue Oct 16, 2018 5:23 pm
Forum: Pro2 Series
Topic: Pro2 Plus Question
Replies: 9
Views: 741

Re: Pro2 Plus Question

you can, i bought a second removable plate and put this on it https://www.amazon.com/uxcell-400mm-Silicone-Thermal-Heatsink/dp/B007PPEW52 then place glass on the thermal pad. the high coefficient of friction that the silicone has means the glass will not have to be clipped down. there is another th...
by wo4sunhao
Tue Oct 16, 2018 4:57 pm
Forum: Pro2 Series
Topic: Pro2 Plus Question
Replies: 9
Views: 741

Pro2 Plus Question

I have bought a N2 plus printer before and it is running ok. I'm looking for a second printer and pro2 plus is my first pick right now. I just have one question about this printer. Could I still use glass bed on Pro2 Plus like I used on N2 Plus?
by wo4sunhao
Wed Aug 22, 2018 4:46 pm
Forum: General
Topic: Part Shifting Again Again and Again
Replies: 37
Views: 4546

Re: Part Shifting Again Again and Again

Vicky@Raise3D wrote:We just move extruder manually and see whether it is smooth or not.

so how do you fix the gantry alignment?

Go to advanced search