Search found 203 matches

by jetdillo
Wed May 27, 2020 5:31 pm
Forum: Hardware
Topic: Bltouch on Raise3d
Replies: 139
Views: 43450

Re: Bltouch on Raise3d

So, from reading this, it looks like I have to give up the Z-Home endstop detector in order to install the BLTouch on my N2+. Is that correct ? Is there a reason you can't use the Z+ socket(Which is unpopulated on my board) vs. Z- ? (Other than the Marlin code hasn't been compiled for that) It looks...
by jetdillo
Sat May 16, 2020 5:54 pm
Forum: Hardware
Topic: Bondtech gear looks like it's popping out, causing major jam
Replies: 7
Views: 1307

Re: Bondtech gear looks like it's popping out, causing major jam

Would you like to advise what printer you are using, Pro or N-series with Bondtech upgrade? If you are using N series printer with the upgrade you should can source replacement parts from Bondtech directly. I'm just not sure whether they sell indiviual parts instead of the whole thing or not. I hav...
by jetdillo
Wed Apr 15, 2020 2:31 am
Forum: Hardware
Topic: Bondtech gear looks like it's popping out, causing major jam
Replies: 7
Views: 1307

Re: Bondtech gear looks like it's popping out, causing major jam

Would you like to advise what printer you are using, Pro or N-series with Bondtech upgrade? If you are using N series printer with the upgrade you should can source replacement parts from Bondtech directly. I'm just not sure whether they sell indiviual parts instead of the whole thing or not. I hav...
by jetdillo
Tue Apr 14, 2020 3:11 am
Forum: Hardware
Topic: Bondtech gear looks like it's popping out, causing major jam
Replies: 7
Views: 1307

Re: Bondtech gear looks like it's popping out, causing major jam

Update: I opened up the hatch on the right extruder and got the gear out to do some comparisons. I put them both under the USB microscope I keep on my bench and noticed there is some distinct wear between the left gear and axle and right one. Bondtech_Axles.jpg I probably wouldn't have noticed this ...
by jetdillo
Tue Apr 14, 2020 2:55 am
Forum: Hardware
Topic: Bondtech gear looks like it's popping out, causing major jam
Replies: 7
Views: 1307

Re: Bondtech gear looks like it's popping out, causing major jam

Vicky@Raise3D wrote:Please open a support ticket at http://help.raise3d.com. Our technicians will guide you through disassmble the extruder and ask for pictures inside to confirm the issue and have to solve it.


Cool.
Thanks Vicky!
by jetdillo
Mon Apr 13, 2020 6:22 am
Forum: Hardware
Topic: Bondtech gear looks like it's popping out, causing major jam
Replies: 7
Views: 1307

Bondtech gear looks like it's popping out, causing major jam

If you own and use something long enough, you'll eventually find all the different ways to break it :) I've had a couple really bad jams over the past day or so where I got the "click of death" from the Bondtech trying to advance in more filament and getting stuck. What's been particularly...
by jetdillo
Mon Apr 13, 2020 5:52 am
Forum: Hardware
Topic: Adapted Olsson Ruby nozzles
Replies: 15
Views: 5559

Re: Adapted Olsson Ruby nozzles

Yes and no. Yes, the hotend itself, heater block, nozzle, thermal barrier tube compatible. No, you need the special heatsink adapter specific to Raise3D N series, you need a 24V heater and K-type thermocouple. So while that kit would give you some of the parts, a lot of it you can't use and are pay...
by jetdillo
Sat Apr 04, 2020 12:00 am
Forum: Hardware
Topic: Adapted Olsson Ruby nozzles
Replies: 15
Views: 5559

Re: Adapted Olsson Ruby nozzles

#1 Get Solex nozzles. They are some of the best nozzles I've used in 10 years of 3D printing. The special 5 axis CNC machined melt path in these nozzles mixes and flows the filament other cheaper machined nozzles that can't match. The only other nozzles I use are Ruby for abrasives, and E3D copper ...
by jetdillo
Fri Apr 03, 2020 11:58 pm
Forum: N Series
Topic: Heater rod/Thermocouple replacement
Replies: 8
Views: 1377

Re: Heater rod/Thermocouple replacement

I think I figured it out. There's a short on the cable for one of the 12V hot-end fans. When the cable on the left fan gets tugged or moves, everything on the heater/fan board cuts off, including the LEDS inside the printer chamber. I've re-headed the connector on that fan and everything appears to ...
by jetdillo
Thu Apr 02, 2020 7:33 am
Forum: Software
Topic: Printing part sections with TPU and PLA
Replies: 2
Views: 801

Re: Printing part sections with TPU and PLA

Hello Raise3D community! I tried searching for this topic, but couldn't find anything related... Would it be possible to print the same part with sections of different material type? My aim is to print a part with PLA and combine it with a section of TPU that will help with achieving airtight elast...
by jetdillo
Mon Mar 30, 2020 2:51 am
Forum: N Series
Topic: Heater rod/Thermocouple replacement
Replies: 8
Views: 1377

Re: Heater rod/Thermocouple replacement

Can you try PID Auto-Tune once and see whether it can work better or not? https://support.raise3d.com/N2-N2-Plus/adjust-pid-parameter-3-784.html I tried the auto PID tuning on the left nozzle and it failed when trying to Auto-Tune to 100C with "Temperature exceeded" on the first loop. I t...
by jetdillo
Sun Mar 29, 2020 6:22 am
Forum: N Series
Topic: Heater rod/Thermocouple replacement
Replies: 8
Views: 1377

Re: Heater rod/Thermocouple replacement

Vicky@Raise3D wrote:Can you try PID Auto-Tune once and see whether it can work better or not?
https://support.raise3d.com/N2-N2-Plus/ ... 3-784.html


I tried the auto PID tuning on the left nozzle and it failed when trying to Auto-Tune to 100C with "Temperature exceeded" on the first loop.
by jetdillo
Fri Mar 27, 2020 8:16 pm
Forum: N Series
Topic: Heater rod/Thermocouple replacement
Replies: 8
Views: 1377

Re: Heater rod/Thermocouple replacement

zemlin wrote:heater/thermocouple instructions: https://s2.raise3d.com/public/media/201 ... uction.pdf


Cool. Thanks!
by jetdillo
Fri Mar 27, 2020 8:15 pm
Forum: N Series
Topic: Heater rod/Thermocouple replacement
Replies: 8
Views: 1377

Re: Heater rod/Thermocouple replacement

Can you try PID Auto-Tune once and see whether it can work better or not? https://support.raise3d.com/N2-N2-Plus/adjust-pid-parameter-3-784.html I haven't tried that. I've watching the overshoot when heating go from 2-3 degrees to about 7 or more and the variance while printing get up to about 3 de...
by jetdillo
Thu Mar 26, 2020 6:08 am
Forum: N Series
Topic: Heater rod/Thermocouple replacement
Replies: 8
Views: 1377

Heater rod/Thermocouple replacement

Is there a document either here or from Raise that details how to replace the heater rod and thermocouple on an N2+ ? The heater on the left hot-end isn't broken, but the hysteresis as it's approaching temperature is getting larger and can bobble by a couple degrees during printing. I've had some sp...
by jetdillo
Wed Mar 25, 2020 6:39 pm
Forum: User's Gallery
Topic: Current Rover project
Replies: 5
Views: 3035

Re: Current Rover project

It's been a long time since I've posted an update here, but the rover is working and rolling around after it's 3rd or so rebuild. The NylonX has been largely replaced with either 8mm cold steel or Polymaker PC. The NylonX actually held up the weight of the entire rover, even on the thinner suspensio...
by jetdillo
Wed Mar 25, 2020 6:00 pm
Forum: Hardware
Topic: Adapted Olsson Ruby nozzles
Replies: 15
Views: 5559

Re: Adapted Olsson Ruby nozzles

#1 Get Solex nozzles. They are some of the best nozzles I've used in 10 years of 3D printing. The special 5 axis CNC machined melt path in these nozzles mixes and flows the filament other cheaper machined nozzles that can't match. The only other nozzles I use are Ruby for abrasives, and E3D copper ...
by jetdillo
Sat Sep 07, 2019 7:43 pm
Forum: User's Gallery
Topic: Current Rover project
Replies: 5
Views: 3035

Current Rover project

Here's my current project that I've recently finished printing and am now wiring/getting the electronics and sensors installed on: A "Curiosity-style" 1/4 scale rover model. Based on the SAWPPY Rover designed by "Roger Random" on Hackaday, my version was printed on my Raise3D alo...
by jetdillo
Fri Jul 26, 2019 8:25 am
Forum: Hardware
Topic: What sealant should be used
Replies: 8
Views: 3918

Re: What sealant should be used

I've been thinking about doing this since early 2018 because the Ender 3 is notorious for jams, and after enough times of my Ender 3 hotend loosening itself and causing major heat creep jams, I'm sick of it. The hotend with this thing is a nightmare. After looking for sealants for awhile, I finally...
by jetdillo
Fri Jul 26, 2019 8:12 am
Forum: Software
Topic: Ideamaker questions
Replies: 4
Views: 1104

Re: Ideamaker questions

First of all, make sure that your printer profile (Under Printer->Current Printer) is set for 2 nozzles. Now, when you go to slice your model, you should see 2 drop-down selectors: one for Left Extruder, one for Right. Click on those drop-downs and select the material template from the list of slici...

Go to advanced search