Search found 9 matches

by Chris
Tue Jun 08, 2021 1:16 pm
Forum: Printing Settings
Topic: PLA Extrafill Traffic Black from filament2print
Replies: 14
Views: 2016

Re: PLA Extrafill Traffic Black from filament2print

new test, I decide to adjust the tightness of the filament drive screw by half. that is to say that at the first test which failed, the tightening of the screw was 2 turns (adjustment which is suitable very well for the ABS previously used). For this new test, the screw is tightened by 1 turn. final...
by Chris
Tue Jun 08, 2021 11:46 am
Forum: Printing Settings
Topic: PLA Extrafill Traffic Black from filament2print
Replies: 14
Views: 2016

Re: PLA Extrafill Traffic Black from filament2print

Hi Steven, sorry for delay I just come back. So unfortunatly your block test stop very early ! please see photos attachment juste to know PLA extrafill comme directly from a Silica box : 24° with 19% humidity inside the Pro serie2 it's about 35% and 30° after printing let me know next step. regards
by Chris
Sat May 22, 2021 9:56 am
Forum: Printing Settings
Topic: PLA Extrafill Traffic Black from filament2print
Replies: 14
Views: 2016

Re: PLA Extrafill Traffic Black from filament2print

Hi, yes, I used this template ( https://www.raise3d.com/compatible-filaments/ ) yes, I use Top cover off with this PLA ( NOTA : with raise PLA I always keep Top cover on and I got always success print ;) yes front fan running at 100%. only with a global speed setting at 35mm/s and setting above gave...
by Chris
Thu May 20, 2021 7:11 am
Forum: Printing Settings
Topic: PLA Extrafill Traffic Black from filament2print
Replies: 14
Views: 2016

Re: PLA Extrafill Traffic Black from filament2print

Hi Sandro, thank's for your recommandations. I already used dry system. The most important setting finally is like you explained about Speed. I set all at 35mm/s and since I have success to print with PLA fillamentum. About cool fand at 100%, I tested it but it's not good with buildtak because you c...
by Chris
Sat May 15, 2021 8:46 am
Forum: Printing Settings
Topic: PLA Extrafill Traffic Black from filament2print
Replies: 14
Views: 2016

Re: PLA Extrafill Traffic Black from filament2print

Unfortunatly, official compatible fillamentum PLA Premium Extrafill with Raise3D pro2 doesn't work better !

So, let me know if there's a other thing to do to have a chance with this fillament with my Pro2 ?

thx for your support

regards ;)
by Chris
Fri May 14, 2021 2:01 pm
Forum: Printing Settings
Topic: PLA Extrafill Traffic Black from filament2print
Replies: 14
Views: 2016

Re: PLA Extrafill Traffic Black from filament2print

Hi,

sorry I just find a preset setting of fillamentum Extrafill on you cloud, I test it and send you me feedback ;)
by Chris
Fri May 14, 2021 10:06 am
Forum: Printing Settings
Topic: PLA Extrafill Traffic Black from filament2print
Replies: 14
Views: 2016

Re: PLA Extrafill Traffic Black from filament2print

Yes, I tested with top cover off and set head at 200° and also 190° instead of 205° form original setting but the problem don't change

after 2h of printing, filament is blocked like previous photo !

What can I do now to resolve this problem ?

have any chance to use this PLA ?

regards ;)
by Chris
Thu May 13, 2021 9:09 am
Forum: Printing Settings
Topic: PLA Extrafill Traffic Black from filament2print
Replies: 14
Views: 2016

Re: PLA Extrafill Traffic Black from filament2print

hi,

top cover is ON
filament recommandation is between 190 - 210°C

a:)
by Chris
Wed May 12, 2021 10:03 am
Forum: Printing Settings
Topic: PLA Extrafill Traffic Black from filament2print
Replies: 14
Views: 2016

PLA Extrafill Traffic Black from filament2print

Hi, with my Raise Pro2 I can print without any problem PLA from Raise but with "PLA Extrafill Traffic Black from filament2print" https://filament2print.com/fr/pla-premium/745-pla-premium-noir.html I got after some minutes a blockage of the filament like the attached photo, which makes that...

Go to advanced search