Official Raise3D Community

Vicky, any news on this function?

for now, can you break the fin on the opposite side so they would be balanced? That would reduce the noise.

yes, it is supposed to be missing. It helps you put it in the correct orientation.

.

.

wow, a lot of stuff is on that site, even the replacement clear "hood"

the signup is here:

https://www.raise3d.com/pages/thermal-protector-orders

Jetguy, I thought that you suggested not lubing the rods a while back. Something about the bearings should already be internally lubed?
Can you clarify? I just want to be sure. Were you referring to the rods or some other parts that we should not lub?

thank you!

you can use a heat gun to soften the plastic, then just peel it off the hotend.

John

Did you figure out what caused this one?
*** "and why my gantry moves so much more easily on my new machine than my older one."***

Charles

Martin, will you make an adapter available for those of us with the original kickerstarter motors? I think Jetguy mentioned that the cables / plugs are not the same as the new pancake motors?

thanks!

Yes, only difference is the height.

Thanks Charles your solution worked great....my other printers print at a 4, I double the N2, that was already at 5, to 10 and it looks great.......we also noticed that the temp of the hot end is set at 215, im lowering it to 195, what my other machines do, and testing another one to see what it do...

Jetguy wrote:Use this site instead for online repair now https://makeprintable.com/

Looks like Makeprintable.com is no longer free...

these look good!

I use the original camera they sold with the printer. It is far from ideal since the focal distance is not great for having it in the machine. Others here have used everything from the Nest camera to other low end network cameras. Just do a search on camera and see the old threads on here.

no, there are no supported camera; the camera tab is just a tease... They meant to have it a originally, but have since dropped the idea. They really should remove that tab.

you need more layers on top. Go into the infill tab of ideamaker and change the # of layers on top to a higher number

Are you sure vase mode is turned on in Ideamaker? There shouldn't be any explicit layer changes since it is all continuous.

Did you measure the diameter of the Verbatim PLA to make sure it is 1.75mm or less?