Search found 83 matches

by 3DWP
Sun Oct 06, 2019 6:21 pm
Forum: Hardware
Topic: Display has gone suddenly
Replies: 32
Views: 7046

Re: Display has gone suddenly

It could be the tablet battery needs to be charged well, I hope your screen will work after getting some power. I'm sure Raise3D can help you with this.
by 3DWP
Sun Aug 25, 2019 9:33 am
Forum: General
Topic: How is the Pro2 compared with Prusa i3 MK3S and Tiertime printers?
Replies: 6
Views: 961

Re: How is the Pro2 compared with Prusa i3 MK3S and Tiertime printers?

A little DHMO never hurt anybody, I get exposed to it daily and feel fine. Here in the Netherlands we live below sea level so we are extra careful with the stuff but still we can't live without it either. On topic: the filters work about the same. Tiertime has promised gcode support which I find imp...
by 3DWP
Tue Jul 30, 2019 8:05 am
Forum: Hardware
Topic: Display has gone suddenly
Replies: 32
Views: 7046

Re: Display has gone suddenly

Thanks but it was bought at Raise3D. Now I was forwarded to another reseller, I was quoted that it will cost more than €500!

Seems a bit high.. The machine was rarely used and bought in 2017 so no warranty (as expected so I was willing to buy a replacement) but these are SSYS prices :o
by 3DWP
Sun Jul 28, 2019 11:15 am
Forum: Hardware
Topic: Display has gone suddenly
Replies: 32
Views: 7046

Re: Display has gone suddenly

I am trying to find out how to replace the screen but I have to show the invoice and where it was bought (support insists the reseller should help me), why should it be this hard to order? It's not like the printer wasn't made by Raise3D. It's your product right? I already gave the serial number so ...
by 3DWP
Tue Jul 23, 2019 11:43 am
Forum: Hardware
Topic: TOP COVER Replacement N2+N2 Plus
Replies: 18
Views: 3581

Re: TOP COVER Replacement N2+N2 Plus

Wow, looks nice! Any updates?
by 3DWP
Tue Jul 23, 2019 11:38 am
Forum: Pro2 Series
Topic: Pro2 Cart
Replies: 3
Views: 344

Re: Pro2 Cart

I really like the look of that cart but I just saw the price :o

My N2 Plus looks good on it's own wheels too :roll:
by 3DWP
Tue Jul 23, 2019 11:32 am
Forum: Hardware
Topic: Display has gone suddenly
Replies: 32
Views: 7046

Re: Display has gone suddenly

Sometimes the screen can't install the driver on wireless mouse. If your screen can be controlled by a mouse to cover all the function, then the issue should be only related to touchscreen. All the other boards and cables should be still functional. To fix the touch issue fully, you may need to con...
by 3DWP
Sat Jul 20, 2019 7:51 am
Forum: User's Gallery
Topic: Bracket/Fix for N2 Rotating Z-Axis Ball Nuts
Replies: 18
Views: 3934

Re: Bracket/Fix for N2 Rotating Z-Axis Ball Nuts

I can't say I can see the accuracy has improved (the rods are a bit too thin and print head too heavy) but this does fix the sound when for instance the printer performs Z-hop. So I'm happy with this design.
by 3DWP
Wed Jul 17, 2019 9:26 am
Forum: General
Topic: What are the materials used for 3D printing?
Replies: 1
Views: 516

Re: What are the materials used for 3D printing?

What is this nonsense? Somebody trying to get higher in Google?
by 3DWP
Fri May 24, 2019 6:14 am
Forum: Hardware
Topic: Display has gone suddenly
Replies: 32
Views: 7046

Re: Display has gone suddenly

Is a wired mouse different than a wireless mouse in this case? In my first post I mentioned I tried a mouse and that I can use that to control the printer..
by 3DWP
Wed May 22, 2019 11:10 pm
Forum: Hardware
Topic: Display has gone suddenly
Replies: 32
Views: 7046

Re: Display has gone suddenly

The touch screen still doesn't work, no area reacts to touch.. The printer hasn't been used a lot, is this somehow fixable?
by 3DWP
Mon May 20, 2019 6:30 pm
Forum: Hardware
Topic: Display has gone suddenly
Replies: 32
Views: 7046

Re: Display has gone suddenly

Hi, we have a similar but not exactely the same problem. Our N1 had not been connected to the the power grid for a few months so the battery went completely empty. When we wanted to take it back into operation, we had the touch-function only in the upper half of the display, the lower doesn't react...
by 3DWP
Sat Mar 30, 2019 12:51 pm
Forum: Software
Topic: ideaMaker 3.4.0-Beta Release Notes Updated Rev. 3.4.0.2855-Beta, 2019.04.04
Replies: 41
Views: 3079

Re: ideaMaker 3.4.0 Beta Release Notes

Nice, thanks! Impressive list.
by 3DWP
Sun Feb 03, 2019 8:13 pm
Forum: Hardware
Topic: what happened to the the Official Raise3d Camera?
Replies: 45
Views: 11696

Re: what happened to the the Official Raise3d Camera?

I can confirm it all works, I have installed the camera some time ago, already had the filament sensor and used the respective firmwares.
by 3DWP
Wed Dec 05, 2018 9:05 pm
Forum: Hardware
Topic: what happened to the the Official Raise3d Camera?
Replies: 45
Views: 11696

Re: what happened to the the Official Raise3d Camera?

Vicky@Raise3D wrote:You can get firmwares from this page: https://www.raise3d.com/pages/filament- ... nstruction
There is no influence between run-out sensor and camera. One is connected directly to motion board, the other works with touchscreen.


OK, thanks Vicky!
by 3DWP
Sat Dec 01, 2018 12:08 pm
Forum: Hardware
Topic: what happened to the the Official Raise3d Camera?
Replies: 45
Views: 11696

Re: what happened to the the Official Raise3d Camera?

What is the status of this? I have a filament runout sensor, that seems to still need a different firmware file.

Can I use a camera and still have the filament sensor enabled? Will that maybe be one upgrade to rule them all?
by 3DWP
Mon Nov 12, 2018 12:58 pm
Forum: Hardware
Topic: Filament Run-out Sensor Install Problem
Replies: 50
Views: 7878

Re: Filament Run-out Sensor Install Problem

The sensor has been working fine for me since my last post, it is still installed that way. But it does not pauze the printer when filament is stuck (clogged nozzle or diameter issues), I thought the optical sensor would notice that too. So only when the filament is out but that's fine, I don't have...
by 3DWP
Tue Oct 30, 2018 9:21 am
Forum: General
Topic: PVA (Flex Filament) and Pro2 Serie ?
Replies: 14
Views: 4114

Re: PVA (Flex Filament) and Pro2 Serie ?

I printed a few good testprints with Formfutura Helios Support, also compatible with ABS: https://www.formfutura.com/shop/product ... tegory=204

But I removed the second extruder because it's a pain to calibrate on the N2.
by 3DWP
Tue Oct 16, 2018 7:34 pm
Forum: User's Gallery
Topic: Bracket/Fix for N2 Rotating Z-Axis Ball Nuts
Replies: 18
Views: 3934

Re: Bracket/Fix for N2 Rotating Z-Axis Ball Nuts

I printed these as well, they look great. Thanks for sharing!
by 3DWP
Thu Oct 04, 2018 11:58 am
Forum: Hardware
Topic: Filament Run-out Sensor Install Problem
Replies: 50
Views: 7878

Re: Filament Run-out Sensor Install Problem

This is how I currently have the sensor installed, it's epoxied to the printer and has this 3D printed part: https://www.thingiverse.com/thing:3099649 Looks nice with the logo, let's hope it will now function as it should. I did have quite some spools I printed empty because of the sensor so that is...

Go to advanced search