Official Raise3D Community

A colleague of mine tried the "Logitech C170 (5MP)" and had good success. I use the same one, it's incredibly cheap and seems to work well. The resolution is low but I'm not sure if this is to do with the camera output or a limit on image size in raise cloud, it works well enough to see i...

Beautiful work, I wonder what the 15th century stonemasons would have thought of this

Caution, for an N series, the daughter card that connects to that screen has a 12 pin touch interface where as that ebay screen linked has a 6 pin incompatible interface. So the LCD might work, but the touchscreen portion will not. Thanks for the info, guess I'll keep using the mouse plugged into t...

I've been looking for a replacement since the Jaycar version has been discontinued, any idea if this one will work? https://www.ebay.com/itm/7-inch-1024-600-LVDS-TFT-lcd-display-with-capacitive-touch-screen-panel/113078515249?hash=item1a54013631:g:NPUAAOSwhTBbKMRw Screen is made by Amelin part numbe...

Nonplanar printing improves the surface quality of top layers on parts by incorporating z-travel at the same time as x-y travel, this is especially useful when the upper surfaces of a part have very shallow slopes which accentuate the layer lines, such as spheres. From what I can tell, it's still qu...

I was thinking about this today too. I think what Noren means is when you slice a model in ideamaker, you have two options: - Export to local disk - Upload to Printer A third option to upload to RaiseCloud would be useful, currently I have to Export to Local Disk then upload the files via RaiseCloud...

I only have 1 printer too, while I agree RaiseCloud is quite "feature rich" for single printer users, the way that it is organised means you don't have to use those tabs. I visited the forum today to say thanks to the Raise3D development team for RaiseCloud, the ability for me to start job...

This looks like not enough filament, did you change your extrusion width settings in the slicer?

We have an open filament program with different filament manufacturers. You can get more information from here: https://www.raise3d.com/pages/the-open-filament-program. We will keep on extending the list. Can you please add support for the older printers to the filament list, I have an N2 and I see...

I'd like to have you test some settings if you'd like to have a try. Edit the first layer height to be 0.2mm, print speed of first layer to be 10mm/s. Increase bed temperature to be 55-60C to provide better adhesion for the first layer. Enable Print Shells in optimal order can provide better bindin...

Thanks Vicky, I'll give those settings a go and see if it makes a difference.

Amazing work!

Sure, the file is too large to attach here as a zip, I have put it on my dropbox here images of the first layer printing here This issue is not just limited to this model and I believe this also contributes to a similarly bad finish on the top layer too, the top is harder to confirm as I'm not usual...

I've noticed that I get different results for the first layer solid fill dependent on the direction of travel of the extruder. The easiest way to describe this is to imagine printing an item where the bottom layer is a square, I have found that I get terrible infill if the print head starts at the t...

Wow! This is truly amazing, thanks for posting. Would love to see some pics of the unfinished pieces.

Forum member mhayduk has printed with it. I recall that it was a struggle. Don't know where he ended up with the stuff. I have a couple samples, but have never tried printing with it. You might try messaging mhayduk (Matt) to see what his experience was. Thanks, I'll wait a few days to see if he sp...

Does anyone have any experience with any of the Igus Iglide 3D printing filaments? Particularly, how it prints (I'm using an N2) and also how it performs in the real world. This is a specialist engineering filament designed for load bearing applications. There's a lot of information on various sourc...

This may not be overly intuitive but it is a really handy feature, thanks to all and thanks for the explanation Jetguy

That is so cool! Great work on the modelling and the finished piece.

My first thought is not the buildplate, it's the fact this Spring is all over temp wise. The thing you have to understand is you do not have a patent protected chamber temp control and even heated airflow. That's literally the line in the sand between a over $10k+ patent protected printer and a con...