Search found 250 matches

by lami3d
Fri Jun 18, 2021 10:01 pm
Forum: Hardware
Topic: Missing pin or not ?
Replies: 2
Views: 43

Re: Missing pin or not ?

Thank you very much Jetguy !
by lami3d
Fri Jun 18, 2021 3:54 pm
Forum: Hardware
Topic: Missing pin or not ?
Replies: 2
Views: 43

Missing pin or not ?

Hi everyone, i have a question about a pin on the printhead that is not on my N2+ (2016) and that is on my N2 (2018). It is the center pin on the left column on t he picture below 20210526_101809.jpg It doesn't seem broken? i just noticed that and wanted to know if it's normal or not ? Thanks for yo...
by lami3d
Fri Jun 04, 2021 7:50 am
Forum: N Series
Topic: Replacement parts needed
Replies: 2
Views: 142

Re: Replacement parts needed

For information, I answer to AMIEL C for the ticket and he closed it...
by lami3d
Fri Jun 04, 2021 7:47 am
Forum: N Series
Topic: Replacement parts needed
Replies: 2
Views: 142

Re: Replacement parts needed

20210604_092917.jpg


The pin is the center pin of the second line on the picture
by lami3d
Fri Jun 04, 2021 7:21 am
Forum: N Series
Topic: Replacement parts needed
Replies: 2
Views: 142

Replacement parts needed

hello; N2+ S/N 10111628002 Bought to makershop (france) 08/08/2016 i've already opened a support ticket (203792) but the answer is "it seems you're in Europe, please contact resselers in Europe..." Of course i'm from Europe... but that's not the answer i'll be wiating for... I think this p...
by lami3d
Thu Apr 09, 2020 9:45 pm
Forum: Hardware
Topic: Serial error: no such device or address
Replies: 9
Views: 5857

Re: Serial error: no such device or address

Thanks Vicky, i did that and i knew blakc USB was under the blue one so it's ok
everything works perfectly
by lami3d
Wed Apr 08, 2020 1:31 pm
Forum: Hardware
Topic: Serial error: no such device or address
Replies: 9
Views: 5857

Re: Serial error: no such device or address

Hello, i've just change my touchscreen et i get this error I update with 1.2.1 touchscreen but i get this message again. I have a question there are 2 usb cables : a black one and and a blue one : do i have to plug these 2 usb cables ? I read "how to replace the touchscreen assembly" and i...
by lami3d
Mon Mar 18, 2019 6:51 pm
Forum: Hardware
Topic: Error: thermal runaway... Now both extruders unresponsive
Replies: 41
Views: 15034

Re: Error: thermal runaway... Now both extruders unresponsive

I think i's a bad contact, sometimes it dispalys 498°C fot the buildplate that is cold...
I have to check all the connections

Is it possible to get a spare cables "motherboard/buildplate" ?
by lami3d
Thu Mar 07, 2019 5:14 pm
Forum: Hardware
Topic: Error: thermal runaway... Now both extruders unresponsive
Replies: 41
Views: 15034

Re: Error: thermal runaway... Now both extruders unresponsive

On my N2 (other printer), i started having "thermal runaway" message a waeek ago. In general, it asked to restart, so i did and it worked well after restarting... It happens at the begining of a print during buildplate heating. Today, the buildplate stopped heating 2 times when i set the v...
by lami3d
Thu Feb 21, 2019 3:37 pm
Forum: Hardware
Topic: Error: thermal runaway... Now both extruders unresponsive
Replies: 41
Views: 15034

Re: Error: thermal runaway... Now both extruders unresponsive

You mean the pin on extruder board or in 3-pin black cable? I would recommend replace the board or the cable instead or try to fix it yourself. The cable was just completly cut where the metal pins squeeze it up. I strip the cable and refix it in the pin but without the clamp... 300H of printing la...
by lami3d
Thu Feb 21, 2019 3:33 pm
Forum: Hardware
Topic: Error: thermal runaway... Now both extruders unresponsive
Replies: 41
Views: 15034

Re: Error: thermal runaway... Now both extruders unresponsive

http://forum.raise3d.com/viewtopic.php?f=4&t=1459&p=12606&hilit=3+pin+connector#p12606 These are the connector plastic shell https://www.digikey.com/product-detail/en/jst-sales-america-inc/VHR-3N/455-1184-ND/608625 and these are the crimp inserts https://www.digikey.com/product-detail/e...
by lami3d
Tue Feb 05, 2019 8:10 pm
Forum: Hardware
Topic: Error: thermal runaway... Now both extruders unresponsive
Replies: 41
Views: 15034

Re: Error: thermal runaway... Now both extruders unresponsive

Hello, i had my first "thermal runaway : error... dump file....'" last night and the print stopped Even if i had it since a long time, i didn't install the thermal protection yet... i think i'm gonna install it quickly now... One of the three black cables on the board located on the printh...
by lami3d
Fri Oct 12, 2018 9:16 am
Forum: Software
Topic: What is the current motion controller board firmware for Raise3D N2 series ?
Replies: 3
Views: 1497

Re: What is the current motion controller board firmware for Raise3D N2 series ?

Thank you vicky
By rebooting the printer the 1.1.0 touchscreen frimware update worked.

Ok, i'm going to update to 1.1.6

And thanks for the information in advance settings.

Thanks again.
by lami3d
Thu Oct 11, 2018 10:16 am
Forum: Software
Topic: What is the current motion controller board firmware for Raise3D N2 series ?
Replies: 3
Views: 1497

What is the current motion controller board firmware for Raise3D N2 series ?

Sorry, but i didn't update for a long time and i noticed that there's a 1.1.6 firmware available... i didn't remember if this version is old or new and if it's ok to install it on printer. I remember that there was problems linked to firmware but didn't remember what firmware i was... I have 1.1.1 n...
by lami3d
Thu Sep 13, 2018 7:47 pm
Forum: General
Topic: Issues with the Pro2 Series
Replies: 8
Views: 10120

Re: Issues with the Pro2 Series

I think raise3D should improve the quality gates along the assembly line and also increase their numbers. To check the ability and skills and experience of the responsibles and the operators on the line, will also help. It's difficult to wait a printer while thinking it may be a "bad" or a...
by lami3d
Thu Sep 13, 2018 6:50 pm
Forum: Pro2 Series
Topic: Stringiness
Replies: 11
Views: 2707

Re: Stringiness

Is the extruder motor hot or very hot when it prints ?
by lami3d
Fri Jul 27, 2018 2:48 pm
Forum: General
Topic: Upgrade Components for N Series are Coming!
Replies: 14
Views: 5909

Re: Upgrade Components for N Series are Coming!

Thank you very much for the explanations !
I already order to bondtech... it was a silly question

I have doubt for dual extrusion for the pro2 (one told me...) so i'm not going to take a dual extruder for the N2...
by lami3d
Fri Jul 27, 2018 1:13 pm
Forum: Hardware
Topic: N2 Touchscreen not reacting to touch on it's left side
Replies: 16
Views: 10626

Re: N2 Touchscreen not reacting to touch on it's left side

Sorry for wasting your time. I think the support team just wants to get as much as information of your issue first, then make an analysis to see whether it is exactly a hardware problem which can only be fixed by replacing parts or some other issues we can provide any help from our side before givi...
by lami3d
Fri Jul 27, 2018 12:54 pm
Forum: General
Topic: Upgrade Components for N Series are Coming!
Replies: 14
Views: 5909

Re: Upgrade Components for N Series are Coming!

Hello, i would be only interested with getting the flat motor instead of the orginal i use with my bondtech single extruder. In order to reduce the weight and to recover the whole bed (actualy, i have a fan and an heatsink at the back of the motor and so 270mm following Y axis instead of 305mm). Is ...
by lami3d
Thu Jul 26, 2018 10:44 am
Forum: Hardware
Topic: N2 Touchscreen not reacting to touch on it's left side
Replies: 16
Views: 10626

Re: N2 Touchscreen not reacting to touch on it's left side

FYI, the LCD used is http://store.linksprite.com/1024x600-7-lvds-lcd-with-capacitive-touch-for-pcduino3/ The only difference is as supplied, the wide JST style wire slides over the standard header pins VS being a socket Again, this picture is the above linked screen direct from linksprite pcduino3_...

Go to advanced search