Search found 5 matches

by raisen3d
Wed Aug 07, 2019 10:03 am
Forum: N Series
Topic: Printer does not start after reboot
Replies: 5
Views: 990

Re: Printer does not start after reboot

Yes...but the answer was not really satisfying :( From the information we have, we can see that you are located in Europe. In order to serve you better, the support of our European Customers is provided in local language by our local distributor or reseller. Therefore, if you are experiencing techni...
by raisen3d
Tue Aug 06, 2019 7:23 am
Forum: N Series
Topic: Printer does not start after reboot
Replies: 5
Views: 990

Re: Printer does not start after reboot

I have already opened the panel. All cables are fine and connected.

I´m wondering because I cannot reach the printer even with a network ping.

Other question: all LEDs are shining blue on the screen board....is this original? Or should they shining green? Maybe there´s a hint for the error.
by raisen3d
Mon Aug 05, 2019 8:36 am
Forum: N Series
Topic: Printer does not start after reboot
Replies: 5
Views: 990

Printer does not start after reboot

After hitting the reboot button, the n2 will not start again. The display is blank and I cannot reach the printer over my network (even not a ping to the IP). I have several times unplug/plug the battery, but with no result. What do you think? Maybe the board has an issue? When it would be the touch...
by raisen3d
Mon Aug 05, 2019 8:32 am
Forum: N Series
Topic: Bad prints / heavy issues
Replies: 4
Views: 1551

Re: Bad prints / heavy issues

I found the solution. I made a reset and forgot to change the e-steps in the settings. That was the cause.
by raisen3d
Mon Jul 01, 2019 10:40 am
Forum: N Series
Topic: Bad prints / heavy issues
Replies: 4
Views: 1551

Bad prints / heavy issues

Hi there! For many months my n2 Plus had printed very well and I also used different nozzles to get really fine quality. But, a few weeks ago the prints are pretty bad. First off all my Bondtech extruder clocked a few times, than I´ve changed the PTFE tube. No better results. I also changed the nozz...

Go to advanced search