Search found 9 matches

by aldosai
Fri Jun 22, 2018 10:48 pm
Forum: Hardware
Topic: half of the touch screen does not work
Replies: 11
Views: 3029

Re: half of the touch screen does not work

20180622_160312.jpg 20180622_155706.jpg Thanks for your help, I checked the cables and everything seems to be in place, the touch screen still does not work. I placed a ticket and for guarantee Raise3D will send me the replacement of the touch screen. I was really surprised by the quick solution, b...
by aldosai
Fri Jun 22, 2018 1:10 am
Forum: Hardware
Topic: half of the touch screen does not work
Replies: 11
Views: 3029

Re: half of the touch screen does not work

Thank you all for your comments, I will check the cables, the screen is not physically damaged or at least no crack or something similar is displayed, I'm going to take photos, upload a video link that I took.

https://drive.google.com/open?id=1MGA7z ... HoBaSxr6Hd
by aldosai
Thu Jun 21, 2018 5:59 pm
Forum: Hardware
Topic: half of the touch screen does not work
Replies: 11
Views: 3029

half of the touch screen does not work

The half of the touch screen does not work, the printer remained off for about 15 days and the battery is not fully charged, only the upper part of the screen works, the lower part does not. I just installed the run out sensor and the thermal protection, I was going to update the firmware and the to...
by aldosai
Sat Feb 10, 2018 9:29 pm
Forum: Hardware
Topic: N1 problem whit the fan's and the stepper motor or extruder temperature
Replies: 8
Views: 1724

Re: N1 problem whit the fan's and the stepper motor or extruder temperature

Thanks for the information, Jetguy, really this information should be available to everyone in the technical information about the N series printers, especially when users are not specialists in electronics. If the technician who attended me, would have given me this option from the beginning to ver...
by aldosai
Wed Feb 07, 2018 5:01 pm
Forum: Hardware
Topic: N1 problem whit the fan's and the stepper motor or extruder temperature
Replies: 8
Views: 1724

Re: N1 problem whit the fan's and the stepper motor or extruder temperature

Thanks Jetguy and Vicky. The description of the problem that Jetguy gave is exactly what is happening, I have already bought the cable ribbon that is suggested, now the problem is that the shipments start from March according to what they told me in the sales department. That means that I must have ...
by aldosai
Fri Feb 02, 2018 10:50 pm
Forum: Hardware
Topic: N1 problem whit the fan's and the stepper motor or extruder temperature
Replies: 8
Views: 1724

Re: N1 problem whit the fan's and the stepper motor or extruder temperature

I tried to upload the video that I sent to the technical service here but it tells me that the format is invalid.
by aldosai
Fri Feb 02, 2018 10:48 pm
Forum: Hardware
Topic: N1 problem whit the fan's and the stepper motor or extruder temperature
Replies: 8
Views: 1724

Re: N1 problem whit the fan's and the stepper motor or extruder temperature

Thanks, Vicky. I attach the image of the configuration and the video. The fan that should always be turned on works when I turn on the printer, but when printing starts it
settings.jpg
stops and the one controlled by the gcode does not turn on at all.
by aldosai
Tue Jan 30, 2018 6:22 pm
Forum: Hardware
Topic: N1 problem whit the fan's and the stepper motor or extruder temperature
Replies: 8
Views: 1724

N1 problem whit the fan's and the stepper motor or extruder temperature

I put a ticket in the technical service because the printer stopped printing correctly. Describe the problem: When turning on the printer everything seems fine, charge the filament, and start printing, when you start printing the first layer does it well, in the second do not turn on the fans, even ...
by aldosai
Sun Sep 24, 2017 6:28 pm
Forum: Hardware
Topic: I need help whit N1, shifted layers in complex models.
Replies: 1
Views: 916

I need help whit N1, shifted layers in complex models.

I am new to 3d printing, the N1 is my first printer, from a single extruder. After many adjustments made with the help of the issues already published, I succeeded in printing the calibration cube correctly. Then I tried to print a model of a 1: 500 scale building, but again the layers ran. I read a...

Go to advanced search