Official Raise3D Community

Vicky@Raise3D wrote:Would you mind contact us via support ticket. May need to get both technicians and developing team involved into the issue you have seen.

Ok, I will do this. Thanks

Hello Vicky, I did the update. The Version is 1.4.1.529... for Pro2Series/NSeries. Since then, it is not working fine at all. I does under extrusion a lot. Seems to be 50%. This is the same project that I print. No change. I have the N2 Plus Dual. Bondtech, camera, filament sensor Upgrades. Firmware...

Yes, I did the Bondtech extruder upgrade more than a year ago. This was also to get better results with flexible filament. Normally, this prints with greater success. But flexible filament is still difficult to calibrate, or not easy to print. It take a good filament and Perfect settings. On the Bon...

It is working in the ideaMaker 3.5.0 beta . You have the check the box in the preferences.

Hi! You can read this topics to help.
https://forum.raise3d.com/viewtopic.php?f=2&t=493
https://forum.raise3d.com/viewtopic.php?f=4&t=899
https://forum.raise3d.com/viewtopic.php?f=2&t=879
https://forum.raise3d.com/viewtopic.php?f=2&t=1805

Good question. Ce serait super!

Sorry for the delay. Yes it's my design. It keep the coffee hot more longer.

Good setup, I like that! Well done.
In the past, I have drawn and printed this Top Cover. But it's easier to make a extension, like you did.

Coffee Glass Cover made with my Palette 2 Pro. The Wonderful Filament PLA MatterForge Black and White.

Yes I think it's been a long time!

After many try-out, I have disabled (since the beginning) the filament runout sensor through the software by going to Settings- > More Settings -> Advanced Settings -> Turn on Filament Runout Sensor and disabling that option . I have also unplugged the filament runout sensor(in the electric box) , b...

Ok I understand. Sounds good!

This morning I have checked every cables inside the printer and the link between the Raise touchscreen and Rumba PCB, as suggested. Everything is plugged and ok. except WIFI. Filament Run-Out sensor… Because maybe this is the issue. Even turned-off the option in the raise3d touchscreen, it may possi...

Here the last discussion with Mosaic: Hi Luc, I'm sorry to hear that you haven't found success yet. I've received a response from our Raise user, but they have not experienced your issue in the past. Their advice is to check that you have an efficient link between the Raise touchscreen and Rumba PCB...

Hi Aleguti, Ok, good (or bad…) to see that I am not alone… I work on this since a week. For my N2 Plus profile, I have made one, and I also tried the Pro2 canvas printer preset. I always had issues on my printer. Yes I contact them by email and Raise3d also. Nobody find a solution up to now. I have ...

Does someone is having success with his Palette 2 or 2 Pro, with a Raise3d N2 or N2 Plus? Or like me, is having problem with the G Code from Canvas slicer, in the printer?

Thanks,

Could you split in 2 your part at the yellow plan? And glue them together after?
So, you would be able to program what you want. Just an alternative here.

The only problem I still having is "Checksum" errors… I guess it is G Code from Canvas that Marlin doesn't like. Does somebody have an idea what would correct this? Please?
Thanks!
Luc

Sorry about the non-rotated pictures...

There is a printer profile in Canvas Beta for the Pro2. Me I did a printer profile for my N2 Plus. It works, but I still have to do adjustments.

Bien, dans Ideamaker, tu n'as qu'à choisir la pièce pour l'imprimer sur l'extrudeur droit et imprimer sur cette extrudeur fonctionnel; en attendant que tu trouves la solution. Tu fais bien de persévérer. Moi ça fait bientôt 3 ans que j'ai ma N2Plus. J'ai beaucoup moins de problème et de méconnaissan...