Search found 16 matches

by martialgeudin
Mon Sep 30, 2019 3:08 pm
Forum: Pro2 Series
Topic: Runout sensor
Replies: 4
Views: 697

Re: Runout sensor

found the issue, but not sure that this is the reason. I unscrewed the protection of the sensor and moved the housing by shaking. Suddenly the LED turn on. When I tested it with a filament after having fixed the sensor with the two screws. I remarked that the left LED reacted very slowly if the fila...
by martialgeudin
Mon Sep 30, 2019 6:48 am
Forum: Pro2 Series
Topic: Runout sensor
Replies: 4
Views: 697

Runout sensor

The runout sensor of my Raise3d Pro2 has an issue on the left side. It doesn't light up when the filament is gone. The right side is working well. In the left gate nothing to see in it so should lighten the empty LED on. Is it possible that the electronic fails on one side or is a wire somewhere the...
by martialgeudin
Tue Apr 30, 2019 6:51 pm
Forum: Printing Settings
Topic: Ramp to Print Surface in Raft Printing??
Replies: 16
Views: 2348

Re: Ramp to Print Surface in Raft Printing??

Thanks for the ideas, but this is changing the whole machine. I could do this, but I think that it has to be possible to manage it in the software. Just need to know how to set the bed leveling points as reference points for the g-codes to be considerate and make the printed part at the correct size...
by martialgeudin
Sun Apr 28, 2019 6:39 pm
Forum: Printing Settings
Topic: Ramp to Print Surface in Raft Printing??
Replies: 16
Views: 2348

Re: Ramp to Print Surface in Raft Printing??

Thanks crimsonyoshi for your point of view, where I can accept the technical limits. I have a digital clock where -for I printed a support to fix it on the nozzle carrier. I didn't yet adjust the table, because of the related time to calibrate it and not making it worser than it was. I noticed also ...
by martialgeudin
Fri Apr 05, 2019 7:43 pm
Forum: Printing Settings
Topic: Ramp to Print Surface in Raft Printing??
Replies: 16
Views: 2348

Re: Ramp to Print Surface in Raft Printing??

the part is totally printed. The part has the following dimension: From left to the right: 190 mm, from top to bottom 225mm. The height is at 4 points different: on the picture at the left top: 56,40mm, at the right top 56,55mm, at the left bottom 56,51mm, at the right bottom 56,59 mm. this means th...
by martialgeudin
Mon Apr 01, 2019 8:36 pm
Forum: Printing Settings
Topic: Ramp to Print Surface in Raft Printing??
Replies: 16
Views: 2348

Re: Ramp to Print Surface in Raft Printing??

thanks Vicky, even if the actual job isn't as perfect as I would like to have it, I will let it run to the end, so that I can messure the part on each side and let you know if there are differences. What I don't understand, is with the gantry method and the raft, even if the building plate should be...
by martialgeudin
Mon Apr 01, 2019 5:51 am
Forum: Pro2 Series
Topic: Bed Level Issues
Replies: 5
Views: 1246

Re: Bed Level Issues

look also to the discussion here in the forum: dragging into the printed surface
by martialgeudin
Mon Apr 01, 2019 5:40 am
Forum: Printing Settings
Topic: Ramp to Print Surface in Raft Printing??
Replies: 16
Views: 2348

Re: Ramp to Print Surface in Raft Printing??

you should think that the problem solves it self after each layer is printed and a certain height. But this isn't the case, you can see that the nozzle is dragging into the already printed layers. It's a messy result. Is there an incremental error? I had the nozzle, heater ripped of, a fuse blown wi...
by martialgeudin
Sun Mar 31, 2019 7:46 pm
Forum: Printing Settings
Topic: Ramp to Print Surface in Raft Printing??
Replies: 16
Views: 2348

Re: Ramp to Print Surface in Raft Printing??

what I remarked at the building of the raft, is that it seems that the bed isn't parallel to the nozzle travelling plane. Is it possible that the machine bed is disturbed by a stepper motor not been synchronized, or desynchronized. If this isn't the issue, who can it be releveled and calibrated?
by martialgeudin
Sun Mar 31, 2019 1:00 pm
Forum: Printing Settings
Topic: Ramp to Print Surface in Raft Printing??
Replies: 16
Views: 2348

Re: Ramp to Print Surface in Raft Printing??

I think I have the same issue, already damaged 2 nozzles, two buildtac surfaces and the bed plate is also scratched.
The raft is perfectly printed, the issue begins at the first layer. As it looks like the the Z-axis is not responding as it should or a g-code error.
by martialgeudin
Fri Mar 01, 2019 9:32 pm
Forum: Printing Settings
Topic: PEHD, Polyethylene high density
Replies: 1
Views: 612

PEHD, Polyethylene high density

Does someone already used PEHD on a Raise3D Pro2? What are the recommandations for printing with this material? What settings to use, what is the building bed made of? Are there some examples made with this material? What are the issues and what can be done on it?
by martialgeudin
Tue Feb 26, 2019 3:33 pm
Forum: Printing Settings
Topic: Wipe Tower reducing material use
Replies: 4
Views: 902

Re: Wipe Tower reducing material use

Vicky, can you explain a little more in detail how to do this?
by martialgeudin
Sat Feb 23, 2019 10:06 pm
Forum: Printing Settings
Topic: Wipe Tower reducing material use
Replies: 4
Views: 902

Wipe Tower reducing material use

Hello, can someone tell me if there is a possibility to avoid unnecessary loss of material when in dual print one of the materials aren't used any more? For exemple one of the materials is PLA the other HIPS as support material. My piece has a need of support till the piece is build up at 15 mm high...
by martialgeudin
Fri Jan 04, 2019 9:21 am
Forum: Printing Settings
Topic: Different speeds with dual prints
Replies: 8
Views: 1267

Re: Different speeds with dual prints

Vicky, I made a setting for a dual print of CPE and FLEXFILL. I analyzed it in the preview for the print speeds and the colors of the speeds correspond to what I set up. I will make a print with this settings and let you know. I noticed that you write "Pre-group settings" and "Pre-lay...
by martialgeudin
Thu Jan 03, 2019 11:03 am
Forum: Printing Settings
Topic: Different speeds with dual prints
Replies: 8
Views: 1267

Re: Different speeds with dual prints

hi Vicky, I will try this, do you have a little movie of this as a tutorial? This would be great to follow each step and if needed review it to understand the several steps. For this community this would be a next level and professionalize it. Thanks in advance. Can you also advise on the flexible f...
by martialgeudin
Wed Jan 02, 2019 10:10 am
Forum: Printing Settings
Topic: Different speeds with dual prints
Replies: 8
Views: 1267

Different speeds with dual prints

I am looking to print CPE and FlexFill (flexible fillament). Herefor I need two different print speeds. One for CPE and another for FlexFill. As the FlexFill needs very slow print speed and also a slow flowrate it's not easy to combine it with another fillament as CPE that needs a faster print speed...

Go to advanced search